Parts for Cub Cadet 17AI5BHB056: Steering Columns / Axles Parts

This genuine MTD replacement part is a steering wheel for use with lawn tractors and riding mowers. A properly functioning steering wheel is essential for the safe and reliable use of a lawn tractor or riding mower. The steering wheel turns the vehicle and allows for safe maneuvering.The steering wheel may become worn out or damaged with extended use, necessitating replacement. Remember to check the steering wheel periodically to spot any wear or damage. This part is an identical replacement for a steering wheel that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Craftsman, Husky, MTD, Troy-Bilt, and more lawn tractors and riding mowers. Please note: original part numbers 631-04008 and 631-04008A are now obsolete, and manufacturer has replaced the original part number with this part.

The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head. 

Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.

Symptoms of a bad Hex Head Self-Tapping Screw include:

• Loose or wobbly components
• Difficulty tightening or loosening the screw
• Visible damage or corrosion on the screw

This OEM replacement part is designed for use with various models of MTD outdoor power equipment.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

This OEM screw is a fastener with a trimmed six-sided or hexagonal head plus a washer face on the bearing surface. It is one of the most commonly used fasteners. Considered standard hardware, this component has multiple applications and can be used on woodworking, machine assembly, and mechanical repair. The screw is 3/4 long and has a thread size of 5/16 -18. A hex cap screw is installed into tapped holes by turning the head to fit and tighten. This is the fastener of choice in applications where tight tolerance is necessary. This is a genuine factory part sourced from the manufacturer and is sold individually. It can be used with Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut brands of lawn maintenance equipment including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers.

This screw is a genuine Midwest Engine replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to link materials together by piercing into the materials and then rotating it until the materials are firmly clasped together.It is likely that a screw will have to be replaced at some point in the lifespan of an appliance due to simply losing or misplacing the screw. If the materials that are generally supposed to be held together seem to be loosening or have come apart, it is likely that the screw has either fallen out or has undergone damage that has warped it. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: MTD, Cub Cadet, Troy-Bilt, and Yard Machines. This part sold individually.

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current hex bolt is defective or lost, this part can be used for repair or replacement. It is intended for use with outdoor power equipment.This replacement hex bolt is a standard piece of hardware named for its hexagonal shaped head. Bolts are essential for ensuring components are secured together sufficiently. They may corrode, rust, break, or become stripped over time and will thus require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this shaft attachment, the appropriate owner's manual and equipment diagrams should be referred to. This hex bolt is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This is a special type of washer called a wave washer. It is used for mowers and is compatible with many models from popular brands. The wave washer is used to provide some cushioning between the part assemblies along the shaft in the mower. If it is missing or damaged, it could cause the mower to have more vibrations, which can make it more difficult and uncomfortable to operate.The wave washer is made from metal and it is a durable piece. However, it could corrode or break, and it could be lost when making other repairs to the mower. Owners will want to be sure that they replace the washer if there is any trouble with it. The replacement is easy, but owners should be sure to wear gloves to protect their hands.The wave washer is used with select models of mower from MTD, Ryobi, Troy-Bilt, Yard-Main, Bolens, Cub Cadet, Husky, and Yard Machines. The piece is sold individually. It is a genuine OEM replacement part that was sourced from the manufacturer.

This wave washer is a genuine MTD part. It is manufactured as a replacement part for lawn mowers, push mowers, mulching mowers, and walk-behind mowers. It can also be used with edgers and leaf blowers or vacuums. The washer aids with fasteners as well as making the machine easier to operate.Washers are designed to bear the brunt of some of the wear and tear of the machines. Therefore, it is not uncommon to need to replace them. If making a repair that requires disassembly of the mower, it is recommended to have compatible screws and washers on hand as well. This wave washer is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually, though there are many of them on these machines, so be sure to buy the appropriate amount. It is compatible with equipment manufactured by ACE, Bolens, Cub Cadet, Husky, MTD, Yard-Man, White Outdoor, Columbia, Statesman, MasterCut, Platinum, Yard Machines, Crafstman, and more.

Shoulder screws are a type of fastener used in many types of lawn and garden equipment. Also called stripper bolts or shoulder bolts, they have a head, threads, and an unthreaded shoulder. These screws are used in areas where items need to be held together in a specific location. They can be used with bearings, bushings, and machinery support. Shoulder screws are made of durable metal but can still experience breakage or damage. When this occurs, the screws will need to be replaced. A wrench can be used to remove the damaged shoulder screw. First, visually inspect the shoulder screw to look for damage or corrosion. Sometimes, the screw will be entirely broken. If any of these things are present, a wrench can be used to remove the old shoulder screw. The same tool can be used to insert a new shoulder screw before reassembling the equipment.Designed for lawnmowers, lawn tractors, tillers, leaf blowers, chainsaws, log splitters, chipper shredders, and snowblowers, this part is compatible with items from Yard Machines, MTD, Cub Cadet, Craftsman, Toro, Huskee, Montgomery Wards, Yard-Man, MasterCut, and Troy-Bilt. The locknut is sold separately.

This is a genuine bearing flange that is designed for use in select models of lawn tractors. The bearing flange is part of the rim and tire assembly, securing the moving parts while still allowing for rotation. The bearing is a high-wearing part so the flange will likely also wear out over time. It is common to replace these parts at least once in their lifespan and this genuine OEM part will do the job.If the bearing flange fails, the machine will not be able to operate because the wheel will not rotate as it should. This OEM bearing flange is manufactured to exact standards and will provide an exact fit for compatible units from MTD, as well as select other brands. This part is sold individually and does not include any hardware or other components. Replacing this part will require disassembling the wheel and should only be done in a safe, well-ventilated area. Gloves should be worn to protect the hands. Replacing this part will require a screwdriver, nut driver, and socket set, but should be a simple fix.

This flange bearing is a genuine MTD part, sold individually. This flange bearing can be used as a replacement part in lawnmowers, snowblowers, and edgers. The purpose of a flange bearing for one of these outdoor appliances is to support and facilitate radial and axial motion within the internal mechanisms.The flange bearing in a small engine outdoor appliance might have to be completely replaced if the flange bearing can no longer serve its typical function. This could occur if the flange bearing has suffered from general wear and tear with long-term use, from a direct impact collision with a hard object, or exposure to the elements. If this occurs, the flange bearing should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This flange bearing is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Montgomery Wards, and MasterCut.