Tecumseh String Trimmer Parts

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

A fuel inlet is a connector that allows gasoline from the fuel line of an engine to pass through it into the carburetor. Once in the carburetor, the fuel mixes with air and passes into the cylinder, where it ignites to create power for the engine. Thus, the fuel inlet is attached on the one side the carburetor and to the fuel pipe, or line, on the other. This inlet is used in power tools such as lawn mowers, snowblowers, edgers, pressure washers, chippers, and generators. Periodically, since it is made partially of plastic, the fuel inlet will weather and crack so that it is no longer fuel tight. The main sign to watch out for with fuel inlets is gasoline leakage. This is always a dangerous situation. The user may have to remove the carburetor housing cover to determine whether the leak comes from the fuel line or the inlet valve. It is a good idea to replace each of these pieces at the same time. When choosing a replacement part for the fuel inlet, always use a genuine OEM replacement part like this one. This inlet is compatible with power tools made by Tecumseh, Briggs & Stratton, Toro, MTD, Lawn-Boy, and Cub Cadet.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This part is a replacement muffler. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. It can be used to replace a broken or otherwise defective muffler in a variety of small engine outdoor power equipment. The muffler helps to reduce noise and vibration emitted by the equipment's engine. If this part becomes faulty or detached, it will need to be replaced. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this muffler, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this muffler is suitable for use on several different models of small engine outdoor power equipment manufactured by Tecumseh. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a recoil pull starter used in various snowblowers from major manufacturers. The recoil pull starter is a part of the starter assembly and assists with ensuring the engine gets the right amount of power to start when a user pulls the starter rope. Wear and tear or impacts can cause damage to the starter and it will eventually fail. One of the primary symptoms of a bad recoil pull starter is a slack pull cord when trying to engage the engine to use the snowblower. If this occurs, the recoil pull starter needs to be replaced.Turn off the snowblower and disconnect the spark plug wire before removing the recoil housing cap. Untie the pull rope and replace the starter with a new replacement component. Re-tension the spring with the new recoil starter before reattaching the cap that holds the pulley. Reinstall and coil the cord before reassembling other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The recoil pull starter is designed to be compatible with snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.

This air vane is a genuine MTD part and a genuine OEM part. This air vane can be used as a replacement part for snowblowers and lawn and garden equipment engines. The function of the air vane is to maintain precision tension in order to keep the small outdoor appliance engine running. Air vanes may be replaced during the process of basic engine maintenance. If there is an issue with the precision tension of the snowblower, lawn mower, or other appliance at hand, there might be a problem with the air vane. At first, attempt to tighten the spring of the air vane, as it might have naturally come loose with time. If that does not work, a replacement might be necessary. Air vanes are subject to damage simply from long-term usage or exposure to the elements. If there is visible damage to the air vane, action should be taken immediately to replace it if continuing to use the appliance. Continued use with a damaged air vane will be at the risk of expense to personal property. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This air vane is also compatible with the brands Tecumseh and Toro.

This dampening spring float is for use in lawn and garden carburetors. It is a vital component that prevents flooding in the carburetor, particularly if the equipment is going over rough terrain or is otherwise unstable.When replacing a missing or damaged spring float, be sure to refer to the manual and diagrams for the carburetor it is being installed in. Location and application of this hardware will vary based on the model of the carburetor.This dampening spring float is a genuine OEM part sourced directly from the manufacturer. It is sold individually. The manufacturer is Tecumseh. This dampening spring float is compatible with products by the following brands: Tecumseh, Craftsman, Toro, Cub Cadet, Lawn Boy, and Husqvarna.