Tecumseh Tiller Parts

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.

This is a genuine replacement exhaust valve. The exhaust valve allows the engine to exhaust as needed. This part also includes the retaining ring, which holds the valve in place as it moves in and out to allow the exhaust to escape from the system. Over time and due to repetitive motion, this valve can break down or become damaged. A replacement will be necessary for proper operation of the machine. If the exhaust valve is faulty, the engine may not run correctly. It may not run at all. A replacement will ensure proper operation of outdoor equipment. Be sure to wear gloves and allow the engine to cool completely before doing any type of engine repairs. This OEM exhaust valve is manufactured by Tecumseh. It meets manufacturer standards for an OEM replacement and is compatible with several machines from the brand. The exhaust valve is sold as an individual part and does not include any additional parts or hardware. Those must be purchased separately.

Cylinder head gaskets are part of internal combustion engines found in snow blowers and other lawn equipment, such as riding lawnmowers. They create a seal for the gas in the cylinder, and prevent coolant and oil from getting into the other cylinders. Even with regular use, cylinder head gaskets can fail. The result is a loose, worn, or damaged component that can no longer perform its job. Signs the cylinder head gasket has gone bad include leaks, overheating, and poor engine performance. A replacement part and repair are required to ensure the continued operations of the device.Replacing a cylinder head gasket requires protective gloves and the proper tools. The technique for replacing a damaged or worn cylinder head gasket will vary depending on the engine's location and the particular gasket that has to be exchanged.This cylinder head gasket is an authentic OEM replacement part. It is supplied by the manufacturer and sold individually. It is compatible with both Tecumseh and Toro snowblowers, lawnmowers, and various cycle horizontal engines. It is made of high-quality, durable material.

This is a starter dog that is located right next to the retainer in many types of lawn and garden equipment. It is made of durable metal. This part is responsible for engaging the recoil starting system on the engine. Sometimes the starter dog can become damaged or worn, which will result in an engine that has trouble starting. In this situation, the starter dog will need to be replaced to ensure the lawn equipment works as expected.If the starter dog needs to be replaced, a pair of pliers will be needed for the process. Place the tool on a level surface and disconnect the spark plug wire. The blade assembly and clutch assembly will need to be removed to get access to the starter dog. Take this part out of the tool and replace it with a quality new component. Reassembly the other parts before use.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is made to be compatible with lawnmowers, snowblowers, tillers, edgers, and generators manufactured by Tecumseh, Briggs & Stratton, Toro, Cub Cadet, and Craftsman. The starter dog is sold as an individual part.