Parts for Kenmore 110.61633610 (11061633610, 110 61633610): Top And Console Parts

10 - 16 x 1/2

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This terminal block cover protects the dryer/range terminal block and wiring by keeping connections enclosed and reducing risk of accidental contact or debris intrusion. It restores a finished, safe rear electrical access area. What it does:

• Covers and shields the appliance's electrical terminal block to help prevent accidental contact with live wires
• Helps keep dust, lint and small debris out of the terminal area
• Provides a mounting surface for the terminal block screw or clamp where applicable
• Common service symptom: missing, cracked or damaged cover exposes wiring or looks broken at the rear access

• One terminal block cover

• Disconnect all power at the breaker or unplug the appliance before servicing
• Intended to mount over the terminal block; secure with the factory screw(s) or fastener(s)
• Inspect wiring and terminal connections while the cover is off; replace frayed or damaged wires before reinstalling

The Control Panel is an OEM part for Whirlpool dryers. Mounted prominently on the door, it houses intuitive touch controls, indicator lights, and cycle buttons enabling customized fabric care.

Symptoms of a faulty control panel include:

• Unresponsive buttons that do not initiate programmed cycles  
• Malfunctioning temperature and time displays  
• Erratic electrical stimuli causing cycle interruption
• Physical cracks compromising the protective sealing

Causes may involve residue corrosion of internal circuit boards, limiting conductivity over time. Impact accidents to front door area can also fracture sensitive components.

Compatible models also include those by Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and Kenmore.

This control panel is the user console assembly that houses the oven/range touchpads and display so you can select cycles, set temperatures and view status. It restores the appliance's front-user interface for normal operation. What it does:

• Replaces a cracked, faded, or damaged console face so buttons and displays are usable
• Restores unresponsive or intermittent key/pad operation when the panel is the failed component
• Brings back visible cycle, temperature and timer readouts when display elements are part of the assembly
• Helps stop false or missing inputs caused by worn or broken front controls

• Disconnect power at the breaker or unplug the appliance before starting.
• Handle with care to avoid scratching the face or damaging flex/PCB connections.
• Some models require removing the upper trim or back panel to access mounting screws; keep all fasteners for reassembly.

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a replacement hex nut used to fasten and secure appliance components to their mounting points, restoring stable connections and stopping loose or rattling parts. What it does:

• Threads onto a mating stud or bolt to lock parts in place
• Keeps motors, panels, brackets or assemblies secure during operation
• Replaces damaged or missing nuts that cause vibration or noise
• Helps maintain proper alignment of mounted components

• One hex nut

• Disconnect power and shut off water before servicing
• Use the correct wrench or socket size to avoid rounding the nut
• Tighten snugly but avoid overtightening to prevent thread or part damage
• If threads are damaged, replace mating stud/bolt as well

This electronic control board is the appliance's main control module that manages cycle settings, timing and electronic functions to restore proper operation and user interface responsiveness. What it does:

• Controls cycle selection, timing and heater/motor sequencing per user input
• Communicates with sensors and switches to regulate temperature and operation
• Restores a responsive touchpad/controls when the original board is faulty
• Can resolve symptoms like unresponsive controls, erratic cycles, or failure to start

• Disconnect power before servicing to avoid shock or damage
• Handle the board by the edges and avoid contact with components to prevent static damage
• Reconnect all wiring harnesses and mounting hardware securely before testing
• After installation, run a diagnostic or test cycle to confirm normal operation

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal