Parts for Lg WT1101CW: Top Cover Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This screw cap covers and protects an exposed screw head or mounting hole, restoring a clean, finished appearance and helping shield the area from dirt and moisture. Use it to replace a missing, cracked, or discolored cap.

• Conceals and protects a visible screw head or mounting hole
• Helps keep dust and moisture out of the opening
• Restores a clean, factory look when the original cap is lost or damaged
• Common symptoms: cap missing, cracked, loose, or won't stay in place

• Disconnect power and shut off water when working near electrical or moving parts
• Align the cap over the screw head or hole and press evenly until fully seated—do not force
• If removing an old cap, use a plastic pry tool to avoid scratching nearby surfaces
• Ensure the underlying screw or fastener is properly tightened before installing the new cap

This display power control board assembly powers and controls the appliance display and touch/interface functions so the controls respond correctly and display status information clearly. Designed as a direct-replacement control board. What it does:

• Supplies and regulates power for the front display and control interface
• Processes user touch/press inputs so selected functions start and stop
• Drives display indicators so error codes and status are visible
• Resolves symptoms such as a blank or unresponsive control panel, incorrect or flashing display icons, or intermittent control behavior

• 1 display power control board assembly

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by edges and avoid contact with circuitry or connectors
• Verify connector orientation and seating; use appropriate fasteners and insulation

The Main PCB Assembly is an OEM part for LG washing machines. As the central control unit, the Main PCB Assembly manages critical washer functions like water levels, wash temperatures, spin speeds, cycle times and more. It uses sensor input to monitor operations and ensure the selected cycle runs efficiently. 

Causes of a bad Main PCB Assembly include electronic component failure from power surges, moisture damage, or simple wear over time.

Symptoms of a bad Main PCB include:

• Cycles not starting or incomplete cycles
• Inability to select or change cycles
• Flashing error codes
• Abnormal sounds or vibrations
• Temperature control issues

This OEM replacement is compatible with LG and some Sears/Kenmore models

This top cover replaces the appliance's upper cabinet panel to restore a finished appearance and protect internal components from dust and debris. It fits over the appliance top for a clean, factory look. What it does:

• Covers and protects the appliance top and internal components from dust and debris
• Restores the appliance's finished exterior after repairs or part replacement
• Helps maintain safe, enclosed access to control and wiring areas
• Addresses visible damage, rust, dents, or missing top panel

• Top cover (1)

• Remove power and disconnect the appliance before starting any work
• Typical installation requires removing a few screws and lifting the old cover off; keep fasteners for reuse if undamaged
• Check alignment before tightening fasteners to avoid gaps or stress on the panel
• If sharp edges are present, handle with gloves and take care to avoid scratching finishes

This switch assembly is the microwave's door interlock module. It mounts to the latch board and contains the switches that confirm the door is closed, restoring consistent start/stop operation when worn or sticking switches cause intermittent "door" errors.

• Houses and positions the interlock micro-switches on the latch board
• Signals the control that the door is securely closed so the unit can run
• Common fixes for: won't start, stops when the door is jostled, "door" error messages, or runs but doesn't heat
• Helps correct intermittent operation caused by fatigued or misaligned switches

• Disconnect power before servicing; microwaves retain dangerous high voltage
• Remove the upper grille and control panel to access the latch area per your model
• Note wire locations and switch orientation; move connectors one at a time to the new assembly
• After installation, verify door latching and test operation before reassembly

The Detergent Box Assembly is an OEM part for LG washing machines. This part holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle, ensuring effective cleaning and care for your laundry.

Common causes of a bad detergent box include clogging or blockage from detergent residue, wear and tear from regular use, or damage to the dispenser mechanisms.

Symptoms of a bad Detergent Box Assembly include:

• Detergent, fabric softener, or bleach not dispensing properly
• Residue build-up in the detergent drawer
• Leaks or drips from the detergent box area
• Error codes related to detergent dispensing

This OEM LG part is also compatible with some Kenmore models.

This nozzle assembly directs and focuses spray for proper cleaning or dispensing, restoring correct fluid flow and spray pattern. It helps maintain performance and prevents uneven distribution during operation. What it does:

• Directs spray or fluid flow to the correct area for cleaning or dispensing
• Restores even spray pattern and coverage for improved cleaning performance
• Helps stop erratic or weak spray caused by a damaged or clogged nozzle
• Can reduce leaking or overspray from a broken or misaligned nozzle

• One nozzle assembly

• Disconnect power and shut off water supply before starting
• Access may require removing exterior panels or dispenser components; keep track of screws and fasteners
• Inspect mounting gasket or seals and replace if worn to prevent leaks

The Hinge is an OEM replacement part for LG top-loading washing machines. This hinge allows the washing machine lid to open and close smoothly. One hinge is included in this pack. The hinges are held on by six screws.

Causes of failure can include general wear and fatigue from years of opening and shutting the lid. The connecting bracket may also become misshapen due to excessive weight loads.

Symptoms denoting worn hinges include:

• Difficulty lifting or controlling the lid's movement
• Grinding noises and sounds of strain coming from hinged areas
• Lids left ajar or not sitting completely flush after opening

This OEM LG part is also compatible with some Sears/Kenmore model washing machines.

This factory assembly bundles the small components required to restore a specific sub-assembly in your appliance, helping bring back proper fit, alignment, and reliable operation without hunting for individual pieces.

• Replaces a worn, broken, or missing small assembly so the connected component mounts and moves correctly
• Can help resolve looseness, rattling/clicking noises, misalignment, or parts not staying in place
• Designed to match the original geometry for consistent, long-term performance
• Restores proper operation after physical damage, stripped hardware, or fatigue of clips/fasteners

• Disconnect power and, if applicable, shut off water or gas before service
• Work from your model's diagram to match part orientation and fastener locations
• Keep track of small pieces; take photos during disassembly for reference
• After installation, verify smooth operation and secure fit before full use

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Valve Assembly, Inlet is an OEM replacement part for LG washing machines. It is a crucial component that controls the flow of water into the washing machine tub during the various cycles.

Symptoms of a bad valve assembly, inlet include:

• The washing machine not filling with water or filling slowly
• Incorrect water levels during the wash or rinse cycles
• Water temperature issues (too hot or too cold)
• Leaks or water dripping from the valve assembly area

Causes of a bad inlet valve can range from sediment buildup or debris clogging the valve, to electrical malfunctions or physical damage over time.

This OEM LG part is also compatible with Sears/Kenmore models.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

This filter assembly is the appliance's line noise filter. It conditions incoming AC power and suppresses electrical interference to protect sensitive controls and help restore stable, reliable power when the original filter has failed. What it does:

• Suppresses EMI/RFI on the AC line to reduce electrical noise reaching the control system
• Helps stabilize power to boards, relays, and motors
• Common failure symptoms: no power, intermittent power, tripped breaker or blown line fuse, burning smell or visible scorching at the old filter
• Also known as a line filter, EMI filter, or noise filter

• 1 filter assembly

• Disconnect power to the appliance before servicing; capacitors in some products can retain a charge
• Note wire locations; transfer leads to identical terminals on the new filter and secure the ground connection
• Mount the assembly firmly in the original location to prevent vibration or wire strain
• After replacement, inspect related fuses and wiring if the old filter showed signs of overheating or surge damage

The Dispenser Assembly is an OEM part for LG washing machines. This part dispenses the appropriate amounts of detergent, fabric softener, or other laundry additives at the right time during the wash cycle.

Causes of a bad Dispenser Assembly can include clogging or buildup of residue, damage to the dispensing mechanisms or components, or issues with the electronic controls that regulate the dispensing process.

Symptoms of a bad washer Dispenser Assembly include:

• Improper dispensing of detergent or fabric softener
• Leaks or drips from the dispenser area
• The dispenser drawer not opening or closing properly
• Failure of the dispenser to dispense at the correct time during the cycle

This OEM LG part is also compatible with some Kenmore models.

This clamp assembly secures a hose or tubing connection to maintain a watertight seal and reduce vibration. Replacing a worn or damaged clamp helps stop leaks and prevents hoses from slipping loose during operation. What it does:

• Holds a hose or tube firmly in place to maintain proper sealing at the connection point.
• Prevents leaks caused by loose, cracked or corroded clamps.
• Reduces vibration and rattling from unsecured hoses.
• Common symptom: visible leaking, water pooling, or a loose hose connection.

• Disconnect power and shut off water supply before starting any repair.
• Use the correct pliers or screwdriver for the clamp type; avoid damaging the hose.
• Inspect the mating hose and seal; replace any cracked or hardened hoses before reinstalling.
• Do not overtighten—tighten just enough to secure the hose without cutting or deforming it.

This cover cap is a small plastic trim piece that restores a finished appearance and helps protect the underlying fastener or opening from dirt and debris. It's a simple cosmetic and protective replacement for worn or missing caps. What it does:

• Covers and protects exposed screws, fasteners or small openings on the appliance
• Prevents dirt, lint and moisture from entering vulnerable gaps
• Restores a clean, finished look to damaged or missing trim
• Common symptom: missing, cracked or loose cap that leaves a visible hole or exposed screw

• Disconnect power to the appliance before starting any repair
• Usually installs by snapping into place; may require removing an adjacent panel or fastener first
• Avoid excessive force to prevent breaking the plastic; use a plastic trim tool if needed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.