Parts for Craftsman 247273740: Top Customer Parts

This is an oil filter designed to fit a variety of small, gasoline-powered motors used primarily on lawn equipment. This genuine OEM replacement filter removes contaminants that otherwise would wear down the internal working parts of the engine. While the filter works very well, it should be replaced annually as a part of regular maintenance. Depending on use, the filter may need to be replaced more often. When replacing the oil filter, the crankcase oil must be drained and safely discarded as well. To remove oil from the gasoline engine, start the engine and let it run for a couple of minutes. This circulates the oil and heats the internal engine parts so oil is better able to drain. Next, remove the drain plug located on the bottom of the oil pan and collect the oil. Remember to dispose of the oil safely where it cannot contaminate streams or aquifers. Once the oil has been removed, remove the old filter and discard it properly. The new filter should only be hand-tightened in place as using a wrench may cause the filter gasket to seal to the engine block. This filter will fit Yard Machine mower engines and MTD equipment.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This fuel filter is a genuine MTD part, sold individually. This fuel filter can be used as a replacement part for lawn mowers, snowblowers, pressure washers, generators, tillers, log splitters, lawn tractors, and wood chippers. The purpose of the fuel filter is to prevent the accumulation of external materials such as dirt, debris, and pebbles from entering the fuel line.If the fuel filter is punctured, torn, scraped, or eroded to the point that external materials can pass through it and enter the fuel line and the fuel tank, the component must be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, Cub Cadet, Murray, Wheel Horse, Lawn Boy, Snapper, and Simplicity.

High blades are used on lawnmowers and perform well in all conditions. They are curved on the ends more deeply than low blades, which creates more suction to circulate the cut grass and discharge the clippings more efficiently. High blades work well in deep or wet grass and are less likely to cause clogging. High blades can wear out or become damaged with time and will require replacement.To replace a high blade for a lawnmower, find out what corresponding sized wrench is required to loosen the bolts affixing the current blade. Ensure that the lawn tractor is completely cool before starting, and always wear gloves when working with lawn tractor blades. Remove the old blade, and clean up around the area where the new blade goes before installing and securing it tightly.The high blade is an authentic OEM part made by the MTD manufacturer. The blade is 23.5 inches and is only compatible with the MTD brand lawn tractors with the matching star pattern. It is made of durable, high-quality metal. This is a single lawnmower blade. If two lawnmower blades are required, they must be ordered separately.

This is a rubber variable-speed belt designed for use with lawnmowers. This part ensures that the lawnmower is able to move. Since the belt is under a lot of stress, it can break, become damaged, or stretch out. When any of those things occur, the variable-speed belt will need to be replaced.A pair of pliers and a wrench set will be needed to replace the variable-speed belt. Before making the replacement, the pulleys should be cleaned to ensure the best longevity and performance with the belt. To change the belt, disconnect the spark plug wire and loosen the transaxle pulley. Take the tension off the drive belt, remove the belt, and then secure the new belt. To get the best performance out of the belt, it is a good idea to periodically inspect it for stretching or wear and tear.This variable-speed belt is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as a single component. The belt is made to be used in lawnmowers and lawn tractors made by Craftsman, Toro, Troy-Bilt, MTD, Huskee, Montgomery Wards, and Yard-Man.

This is a set of two keys that are used with lawn tractors. Keys are put into the ignition and turned to start the engine.A new set of keys will be needed if the originals are cracked, broken, bent, or damaged in any way such that the key will not slide into the ignition. Keys can also be easy to misplace, which is another reason why someone may want to replace their keys. It's also a good idea to have extras on hand in the event that the keys are lost.This key set is a genuine MTD part. It is sold individually. This particular key set is compatible with lawn tractors that are manufactured by the MTD brand and Craftsman brand.

This replacement part is a bagger and is intended for use with lawn mowers. This part is compatible with various kinds of lawn mowers. The bagger is responsible for collecting the leaves and other debris during use so that the user can clean up more easily. A new bagger might be needed if the current part is no longer working properly or is damage. If the part cannot stay attached to the lawn mower, it might be best to replace it altogether. If the bag has visible tears or rips, consider replacing this part as well. This should be a fairly simple repair. This is a genuine replacement part made by MTD, sold individually.

This replacement part is a suitcase weight. This is a genuine replacement part made by MTD. This part is typically used to weigh large bags of debris collected by lawn mowers in any way.A new suitcase weight might be needed if the current one is damaged in any way. If the weight is off or unable to properly measure any large bags of debris, a new weight might be needed. Refer to the user manual for more details on how to use this part. Typically this suitcase weight is an added function and option for many lawn mower users. It comes in handy when needing to measure the weight of large bags of debris or leaves. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.