Parts for Frigidaire PCFG3078AFB: Top / Drawer Parts

This replacement refrigerator cabinet liner restores the appliance's interior surface, helping contain spills and support shelves/drawers for reliable storage. Fits specific Frigidaire models; use the part number on your unit. What it does:

• Replaces cracked, warped or damaged interior surface that can allow moisture, odors, and debris to collect
• Provides the finished interior surface that supports shelf and bin mounting points
• Helps maintain a clean, easy-to-wipe interior and prevents insulation exposure
• Reduces the risk of leaks by restoring the proper fit and seals where the liner meets doors and gaskets

• One refrigerator cabinet liner as shown

• Disconnect power and empty the refrigerator before starting; follow manufacturer safety guidance
• Installation generally requires removing shelves, drawers and trim; small fasteners or clips may secure the liner
• Avoid sharp tools to prevent damage; inspect surrounding seals and hardware while replacing the liner

This metal shield protects internal components from heat, debris, and wear, helping the appliance run safely and reliably. It replaces damaged or missing shields to restore proper protection around sensitive parts. What it does:

• Shields wiring and components from heat and debris to prevent damage
• Helps reduce risk of shorting or component exposure caused by a damaged panel
• Common symptom: visibly bent, warped, or corroded shield
• Common symptom: unusual odors or hot spots near the area the shield covers

• One replacement shield/trim panel as shown

• Disconnect power (and gas supply if applicable) before starting any repair
• Wear gloves to protect against sharp sheet-metal edges
• Retain and reuse original fasteners when possible; replace any stripped screws
• If accessing the shield requires removing other panels, keep track of hardware and order of removal

This replacement panel restores your appliance's finished look and helps protect internal components. Replacing a cracked or loose panel eliminates gaps and rattles while keeping nearby trims or controls secured and aligned. What it does:

• Covers and shields internal areas, providing a clean, finished exterior
• Helps retain and align adjacent parts
• Restores proper fit when the original is cracked, warped, or discolored
• Common symptoms: broken mounting tabs, won't stay attached, vibration or rattling, visible gaps

• 1 panel

• Disconnect power to the appliance before servicing
• Wear cut-resistant gloves; edges can be sharp
• Retain and transfer any screws, clips, or badges from the original panel
• Align tabs/holes and secure fasteners evenly—do not overtighten

This glide is a replacement drawer slide that helps the refrigerator or freezer drawer open and close smoothly and stay aligned. It restores stable drawer movement and reduces sticking or uneven travel. What it does:

• Guides the drawer along its track for smooth, controlled opening and closing
• Keeps the drawer aligned to prevent rubbing, binding, or uneven movement
• Replaces worn or damaged glides that cause sticking, sagging, or noisy operation
• Works as a structural support point for the sliding drawer assembly

• One replacement glide

• Basic hand tools are typically all that's needed; remove the drawer to access the glide
• Compare the old glide to this part before installing to confirm fit and orientation
• Keep fingers clear of pinch points; wear gloves if needed and follow appliance power-off safety
• If fasteners are stripped or broken, replace them with OEM-equivalent hardware

This cast-iron cooktop grate replaces a damaged or worn stovetop support to restore stable cookware placement and even heating across burners. Durable design resists heat and normal wear for reliable cooking performance. What it does

• Supports pots and pans above gas burners for safe, stable cooking
• Restores proper clearance and even heat distribution when an original grate is warped or missing
• Eliminates wobbling, shifting, or uneven contact that can affect cooking results
• Made for direct drop-in replacement of the range's existing grate

• Allow the cooktop to cool and disconnect power/gas if required by your range before handling
• Lift out the old grate and set the new grate into position — most grates are drop-in, no tools required
• Check burner caps and alignment after installation to ensure proper fit and flame pattern
• Clean with non-abrasive cleaners; avoid harsh chemicals that can damage the finish

This replacement cooktop grate restores a stable cooking surface on compatible gas ranges. It supports cookware and helps maintain even heat contact so pots and pans sit securely during use. What it does:

• Replaces a cracked, chipped or warped cooktop grate that can cause cookware to wobble
• Provides a stable platform for pots and pans over gas burners
• Helps keep burners accessible and properly positioned for even flame contact
• Resists normal cooking wear when handled and cleaned according to your range's care instructions

• One cooktop grate

• Allow cooktop and burners to cool completely before removing or installing the grate
• Lift the old grate straight up to remove; set the new grate into place so it rests evenly on the cooktop supports
• Handle carefully—grates can be heavy and may have sharp edges if damaged
• Follow your range manufacturer's cleaning and care instructions to avoid damaging the grate finish

This replacement cap closes and seals an opening on your appliance, restoring a secure fit. Install it when the original cap is cracked, missing, or no longer tight to help prevent leaks and contamination.

• Provides a tight closure for an access, dispenser, or service port
• Helps contain liquids and block debris, lint, and odors
• Maintains proper operation where a sealed cover is required
• Replace if the cap is broken, warped, loose, or lost; leaks or splashes develop around the opening

• Disconnect power and shut off water or gas supplies as applicable
• Remove the old cap and clean the mating surface or threads
• Align and press or thread the new cap until fully seated—do not overtighten
• Restore utilities and check for a snug fit and any leaks

The Burner Cap is an OEM replacement part that fits Frigidaire ranges. It is responsible for covering the medium burner igniter on the cooktop. Over time, the cap can become damaged from heat exposure and food debris. Causes of failure include cracking, warping, and corrosion. 

Symptoms of a failing medium burner cap include:

• Uneven or abnormal flame
• Ignition issues
• Improper fit and instability

This cap is compatible with Frigidaire, Gibson, White Westinghouse, Kelvinator, and Kenmore ranges

The Surface Burner Cap is an OEM part for Frigidaire ranges. It fits over the surface burner, providing a protective cover while ensuring proper gas flow and flame distribution.

A bad surface burner cap can be caused by wear and tear, damage, or improper cleaning. When the burner cap becomes faulty, it can result in issues such as uneven flames, inefficient heating, or difficulty in maintaining a consistent temperature.

Symptoms of a bad surface burner cap include:

• Uneven or flickering flames
• Difficulty in reaching desired temperatures
• Excessive gas odor during burner operation

Replace your faulty surface burner cap with this genuine OEM Frigidaire part to restore your cooktop. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Burner Cap is an OEM replacement part that fits Frigidaire ranges. It is responsible for covering the small burner igniter on the cooktop. Over time, the cap can become damaged from heat exposure and food debris. Causes of failure include cracking, warping, and corrosion. 

Symptoms of a bad burner cap include:

• Uneven or abnormal flame
• Ignition issues
• Improper fit and wobbling

This burner cap is compatible with Frigidaire, Gibson, White Westinghouse, Kelvinator, and Kenmore ranges.

The Burner Cap is an OEM replacement part that fits Frigidaire ranges. It is responsible for covering the large burner on the cooktop. Over time, the cap can become damaged from heat exposure and food debris. Causes of failure include cracking, warping, and corrosion. 

Symptoms of a failing burner cap include:

• Uneven or abnormal flame
• Ignition issues
• Improper fit and instability

This Frigidaire cap is also compatible with Gibson, White Westinghouse, Kelvinator, and Kenmore ranges

This removable cooktop griddle provides a flat, durable cooking surface for preparing pancakes, sandwiches and other foods over range burners. It restores a smooth, even surface for stovetop griddle cooking when the original is damaged or worn. What it does:

• Replaces a worn, warped or damaged cooktop griddle to restore an even cooking surface
• Provides a flat, continuous surface for foods that need consistent contact with heat
• Helps reduce hot spots and sticking when the original griddle surface is compromised
• Works with compatible range/cooktop configurations that accept a removable griddle plate

• One removable cooktop griddle plate

• Disconnect power to the appliance (and turn off gas if applicable) before handling parts
• Allow the appliance and griddle to cool completely before removal or installation
• Fit the griddle into the cooktop openings so it sits flat and level; verify proper seating before use
• Clean per manufacturer guidance; avoid abrasive tools that can damage the cooking surface

This door handle replaces a worn, damaged, or missing refrigerator door handle to restore a solid grip and normal door access. It installs on the exterior of the fridge door and gives a finished look while providing reliable pulling strength. What it does:

• Provides a secure grip for opening and closing the refrigerator door
• Replaces cracked, broken, loose, or missing door handles
• Restores proper handle alignment and ergonomics to reduce strain when opening
• Helps maintain the appliance's appearance by covering damaged areas

• Disconnect power or unplug the appliance and empty the door area before starting
• Removal usually requires loosening or removing a few screws or clips from the interior door panel
• Preserve and reuse existing mounting screws or brackets unless new hardware is explicitly listed as included
• Do not overtighten fasteners; test operation after installation to ensure proper alignment and seal

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

The Rear Filler Kit is an OEM part for Frigidaire ranges. It is responsible for sealing gaps and maintaining proper ventilation at the rear of the range. The filler kit prevents air leaks while allowing heat to properly escape from the oven cavity.

Causes of a bad rear filler kit can include normal wear and tear over time, damage that has compromised the sealing properties, or improper installation that has left gaps.

Symptoms of a bad rear filler kit include:

• Improper or uneven baking and broiling results
• Higher than normal temperatures on oven surfaces or cabinets nearby
• Excessive drafts or cold air felt around oven door or oven controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This genuine replacement door seal restores a tight refrigerator fresh-food compartment closure to help maintain even temperatures and reduce frost, moisture, and energy loss. Use when the original gasket is cracked, warped, or no longer seals. What it does:

• Creates an airtight barrier between the door and cabinet to keep cool air in and warm air out
• Helps prevent condensation, frost buildup, and uneven cooling in the fresh-food compartment
• Reduces compressor run time and energy waste caused by a failing seal
• Stops door gaps that can allow food spoilage or excess moisture

• One replacement door seal/gasket for the fresh-food compartment

• Unplug the appliance or switch off power before starting any work
• Clean the mounting surface and remove old adhesive or debris for a proper fit
• Warm and flex the gasket if needed (per OEM guidance) to align and seat it evenly; avoid overstretching
• Inspect and reuse or replace retainers/clips as required; test seal by closing the door and checking for gaps

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

Size: 8-32t x 0.500 inch. Color: Black.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.