Parts for Huskee / Husky 13AS608H131 / 2003: Transmission Parts

This replacement part is a thrust washer. It is a genuine replacement part made by MTD. Thrust washers are small but important component, allowing space between certain parts near and around the engine. Washers are typically used with screws and nuts to provide a tight and secure fit for many different parts in the machine.A new thrust washer might be needed if the current one is damaged or missing. Washers can become stripped over time due to friction and other motions inside the machine and need to be replaced. Be sure the engine is turned off before starting a repair. Typically washers are easy to replace and will only require a screwdriver or pliers.This thrust washer is a genuine OEM replacement part and is sourced directly from the manufacturer. Note that it is sold individually.

This bevel gear is a genuine MTD part, sold individually. This bevel gear can be used as a replacement part in a lawn mower. The purpose of the bevel gear in a lawn mower is to work in conjunction with the inner mechanisms of the appliance within the gear system in order to transmit power to two rotating axles.The bevel gear in a lawn mower might have to be replaced if it is damaged at some point within the typical lifespan of the lawn mower. This could occur if the bevel gear is punctured, dented, cracked, chipped, warped, or eroded.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bevel gear is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This bevel gear is a genuine MTD part, sold individually. This bevel gear can be used as a replacement part for a lawn tractor or a lawn mower. The purpose of the bevel gear is to reverse the directionality of the rotation of two shafts that work in conjunction with one another.The bevel gear of a lawn mower or a lawn tractor might have to be replaced in the event that it is not functioning as usual. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This bevel gear is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, Troy-Bilt, and Cub Cadet.

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

This replacement part is a washer. This part is small but important in various types of equipment. Washers work with other small parts like screws and nuts to ensure that multiple parts are secure and in place during use.A new washer might be needed if the current one is worn down or damaged. It is not uncommon for washers to become dented or otherwise damaged over time due to friction and normal wear and tear within the machine. Work gloves are recommended when working with small parts like washers. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This replacement part is a washer. This is a genuine replacement part made by MTD. This washer is small but an important part of many different machines. Washers allow for certain parts to stay secure during use. These parts typically work with other small parts such as screws and nuts to ensure the proper functioning of the machine entirely. A new washer might be needed if any are visibly missing or damaged. Washers can become worn down over time and might not stay in place. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require common household tools. Be sure the engine is completely powered down before attempting this repair. This washer is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a left hand brake assembly made for use with lawnmowers. The purpose of this part is to create pressure on the pulley so that the blades stop turning when the user turns on the brakes. The part is made of durable materials but contains several small parts. Any of the parts can break or become damaged and cause the brake to need to be replaced. This should be done as soon as possible since brakes that do not work appropriately can be a safety hazard.A basic set of tools and a pair of work gloves are useful for replacing the left hand brake assembly. Take the lawnmower and turn it off before placing it on a steady surface. The spark plug wire should be disconnected for safety. Lower the deck on the mower and remove the mount points before replacing the mower brake on the left side. Test the part before using the tool.The left hand brake assembly is designed to be used with several lawnmowers manufactured by MTD and Cub Cadet. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is sold individually.

This replacement part is a hex screw. This part is small but important in many different kinds of equipment. Hex screws are able to work with other small parts such as washers or nuts to ensure that components are secure within the equipment.Overtightened screws might be stripped and could fall out or get stuck in place, necessitating replacement. Over time, exposure to the elements may lead to a screw becoming worn or corroded, which may cause it to break or get stuck.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a brake puck intended for use with lawnmowers. It is made from durable material and is part of the brake assembly. The purpose of the brake puck is to create pressure on the brake disk whenever the brake pedal is pushed. This part is essential to ensuring the lawnmower stops when a user presses down on the brake. Over time, the brake puck will start to wear down and may need to be replaced.One of the indications that the brake puck needs to be replaced is a squealing sound that occurs when the brake pedal is pressed. This happens because the brake puck wears down, and metal is able to rub against metal. If the problem isn't fixed, it can cause additional issues with the lawnmower. The brake puck should be replaced using a socket set and wrench set.This brake puck is designed for use in lawnmowers manufactured by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. It is sold as an individual part. The puck is a genuine OEM replacement part sourced directly from the manufacturer.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This replacement part is an input shaft for lawnmowers. The input shaft transfers torque from the clutch disk to the countershaft allowing for the lawnmower to switch gears. If the mower is no longer shifting properly, the input shaft might need to be replaced. Luckily replacing an input shaft is a relatively simple process.Before beginning, make sure that the mower engine has cooled. Open the hood cover, and locate the gearbox. Remove the mounting screws that attach the gearbox to the mower. Once removed, remove the gearbox and locate the damaged input shaft. Using a pipe wrench remove the old shaft by rotating it till it comes undone. Once removed, rethread the new input shaft into its proper position. Reattach the gearbox to the mower. After replacing, make sure to power the mower to see if the gears switch properly.This genuine OEM part is sold individually and is compatible with MTD brand lawnmowers.

This replacement part is a snap ring. This is a genuine replacement part made by MTD. This part acts as a fastener and is used to hold certain components within the machine together. This ensures that the appliance is working efficiently and smoothly during use. A new snap ring might be needed if the current one is visibly damaged or no longer able to stay attached. If the ring has become stripped over time, it might be best to replace it. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This input pinion is a genuine MTD part, sold individually. An input pinion can be used as a replacement part in a lawn mower. This genuine OEM part facilitates the rotation of one or more components within the internal machinery of the appliance, and it is made out of durable, high quality metal material meant to withstand frequent exposure to the elements and long-term usage.The input pinion in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance if it has been damaged. The input pinion could be chipped, scraped, cracked, dented, punctured, or eroded, and if this is the case, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This input pinion is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Yard Machines, Huskee, Montgomery Wards, Bolens, and Yard Man.

This replacement part is a transmission housing. It is a genuine replacement part made by MTD. This part is typically found in appliances that use an engine to run. Transmission and many types of machinery help the engine turn off and on. The user is able to use this part to control the engine during use.A new transmission housing might be needed if the current one is damaged in any way. This can lead to the engine not starting or stopping as effectively as during prior uses. Be sure the engine is completely powered down and cooled off before attempting to replace this part. Find further directions in the appropriate owner's manual.This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This transmission housing is sold individually and is sourced directly from the manufacturer.