Parts for Ge GFWH1200D0WW: 04 - Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Small self-tapping screw used to secure appliance panels and internal components. Replaces worn or missing fasteners to restore proper fit and alignment for covers, brackets, and trim pieces. What it does

• Secures sheet-metal panels, brackets or trim to the appliance chassis
• Replaces stripped, corroded or missing screws that allow rattling or loose parts
• Helps restore proper panel alignment and prevents vibration noise
• Works where a self-tapping thread is required in thin metal or plastic mating parts

• Power off and unplug the appliance before servicing
• Use the correct screwdriver bit to avoid cam-out and head damage
• Start threads straight and drive carefully—do not overtighten to avoid stripping
• Replace like-for-like; match screw length and thread type to the original

This M8 hex nut is a standard threaded fastener used to secure components and panels. It restores proper clamping force for connections that have come loose, helping eliminate movement and intermittent contacts. What it does:

• Secures bolts, studs, and mounting hardware to hold parts and assemblies in place
• Restores tight mechanical connections that can prevent rattling or misalignment
• Helps maintain electrical grounding and stable joins where a nut is required
• Commonly used wherever an M8 threaded connection is specified by the manufacturer

• One M8 hex nut

• Disconnect power to the appliance before servicing; follow all safety guidelines
• Replace only with the correct size and thread type for a safe fit
• Hand-start threads to avoid cross-threading, then tighten to appropriate torque (do not overtighten)
• If the nut fastens components related to gas, water, or electrical systems, ensure those utilities are turned off and tested according to local codes

This flat metal washer provides a simple, durable spacer or load distributor for fasteners on select GE clothes washers. It helps maintain secure connections and proper spacing to prevent loosening and uneven loading during operation. What it does

• Distributes bolt or screw pressure to protect mating surfaces and prevent pull-through
• Maintains correct spacing and alignment for assemblies that use small fasteners
• Helps reduce loosening from vibration that can cause noise or misalignment
• Commonly used where a thin, durable washer is needed in washer assemblies

• Disconnect power and unplug the appliance before starting any repairs
• Turn off water supply when working near water lines or tub assemblies
• Use the correct size fastener and torque to avoid over-compressing the washer
• Inspect mating parts for damage and replace any worn hardware to ensure a secure repair

The Door Gasket is an OEM replacement part for GE front-load washing machines. It is installed around the perimeter of the machine's door, creating a watertight seal when the door is closed. This prevents water from leaking out of the washing machine during operation, ensuring efficient and mess-free wash cycles.

Symptoms of a bad Door Gasket include:

• Water leakage around the washing machine door
• Mold or mildew buildup on the gasket
• Visible damage, such as cracks, tears, or wear
• The washing machine door not closing properly

Causes for a malfunctioning Door Gasket can include regular wear and tear, exposure to harsh detergents or chemicals, or buildup of debris that compromises the seal's integrity.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models

The Drive Pulley Kit is an OEM part for GE washing machines. The drive pulley works by transferring the motor's power to the drum via the drive belt, ensuring the drum rotates properly during the wash and spin cycles.

Causes of a bad drive pulley can include wear and tear over time, damage due to overloading the washer, or issues such as misalignment or loose components.  

Symptoms of a bad drive pulley include:

• Loud, unusual noises during operation
• The drum not spinning or agitating
• The washer not completing cycles properly
• Visible damage or wear on the pulley

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This motor assembly kit replaces a worn or failed motor assembly to restore proper operation, reduce noise and vibration, and get the appliance running reliably again. Designed as a direct-replacement assembly. What it does

• Drives the appliance's rotating components so drums, tubs, or blowers spin as intended.
• Helps eliminate failure symptoms like a unit that won't start, won't spin, or only hums.
• Reduces abnormal noises, grinding, or excessive vibration caused by a failing motor.
• Restores normal airflow or agitation when a motor-related fault reduces performance.

• Disconnect power (unplug or flip breaker) before starting any repair.
• Basic hand tools and moderate mechanical skill are typically required; follow factory service instructions.
• Keep wiring orientation and mounting hardware correct; replace any damaged clips or fasteners.

This support pressure hose connects the refrigerator's pressure-sensing system to the air chamber, helping the dispenser/ice system sense and regulate pressure. Replaces a cracked or collapsed hose to restore proper pressure communication. What it does:

• Channels air pressure from the dispenser/ice housing to the pressure sensor or switch
• Prevents false pressure readings caused by kinks, cracks, or blockage
• Commonly replaced when dispenser or ice maker shows inconsistent operation or error codes related to pressure
• Helps restore reliable dispenser/ice system response when the original hose is damaged

• Refer to the refrigerator service manual for proper routing and secure connection points
• Disconnect power and water supply before beginning service to avoid shock or leaks
• Inspect clamps and nearby fittings; replace damaged clamps or seals as needed

This pressure hose clamp secures the small vacuum/pressure hose to its fitting, keeping the hose in place so the appliance can accurately sense water level and cycle pressure. Simple, direct replacement for a worn or loose clamp. What it does:

• Holds the pressure/vacuum hose snugly to prevent leaks or hose detachment
• Helps maintain proper pressure signal for correct cycle and fill operation
• Commonly used when a loose or damaged clamp causes intermittent pressure-related symptoms
• Small replacement part that restores a firm hose connection

• Disconnect power (and water, if applicable) before servicing the appliance
• Use a small screwdriver or pliers to remove the old clamp and secure the new clamp in place
• Ensure the hose is fully seated on the fitting before tightening the clamp

The Inner Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp secures the door boot seal, ensuring it stays in place and forms a watertight barrier between the washer door and drum.  

Causes of a bad clamp can include regular wear and tear, corrosion from detergent and water exposure, or physical damage from rough handling. 

Symptoms of a bad inner door boot seal clamp include:

• Water leaking from the front of the washing machine
• The door boot seal coming loose or not staying in place
• The washing machine door not closing properly
• Visible rust or damage on the clamp

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Outer Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp ensures that the seal is tightly held in place, preventing water from leaking out of the front load washer during operation.  

Causes of a bad Outer Door Boot Seal Clamp can range from corrosion due to exposure to moisture and detergents, to physical damage from improper installation or removal of the door seal.  

Symptoms of a malfunctioning Outer Door Boot Seal Clamp include:

• Water leaking from the front of the washing machine
• The door boot seal coming loose or detaching from the front panel
• Visible damage or corrosion on the clamp, compromising its integrity

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.