Parts for QFW150SSN0WW: Tub Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This ground screw secures an appliance's chassis grounding connection to ensure a reliable electrical ground and help reduce the risk of shock or electrical faults. Simple replacement when the original screw is missing, damaged, or corroded. What it does:

• Fastens the appliance ground wire or grounding strap to the metal chassis for a secure electrical ground.
• Restores a proper grounding point when the original screw is loose, stripped, corroded, or missing.
• Helps address symptoms related to poor grounding, such as intermittent power, electrical noise, or tripped breakers (as reported).
• Provides a direct, stable connection that supports safe appliance operation.

• One ground screw

• Disconnect power to the appliance before attempting any repairs to avoid electrical shock.
• Tighten to snug contact with the chassis; avoid overtightening which can strip threads or damage the metal.
• If ground wire or chassis threads are damaged, inspect for necessary additional parts or repair.

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

This water inlet tube clamp secures the refrigerator/ice maker water inlet tube to the housing, helping prevent leaks and tube movement. Designed to keep the fill line stable for reliable water and ice delivery. What it does:

• Holds the water inlet tube in place to reduce stress and movement at the connection
• Helps prevent chafing or kinking that can lead to leaks or flow restriction
• Maintains proper alignment of the fill line during normal use and servicing
• Fits where the inlet tube passes through or attaches to the fridge housing

• Turn off power and water supply before servicing the appliance
• Accessible from inside the refrigerator or behind the toe grille depending on model; remove panels as needed
• Inspect tubing and fittings; replace clamp only if it matches OEM fit and function

This outer gasket clamp secures the washer's door boot to the front panel, maintaining a tight seal at the door opening. Replace a bent or stretched clamp to stop leaks and keep the gasket seated correctly.

• Holds the outer lip of the door gasket/boot to the front panel
• Helps maintain a watertight seal around the door opening
• Common symptoms of failure: front-of-machine leaks, gasket slipping off the rim, visible clamp damage or loss of tension
• Replace if the clamp is bent, stretched, corroded, or missing

• Disconnect power before servicing
• Open the door, carefully remove the old outer clamp, and ensure the gasket is evenly seated on the front panel lip
• Install the new clamp evenly around the perimeter; avoid pinching or twisting the gasket
• Run a short cycle and check for leaks before returning the appliance to service

This inner clamp secures the washer's door gasket to the front tub to maintain a tight, watertight seal. Replacing a stretched or damaged clamp helps stop leaks and keeps the gasket properly seated during wash and spin. What it does:

• Fastens the inner lip of the door gasket to the tub collar
• Maintains a watertight seal to prevent leaks at the door area
• Helps keep the gasket from slipping, wrinkling, or coming off
• Typical symptoms include water on the floor at the front, a loose/sagging boot, or a clamp that won't tighten

• 1 inner gasket clamp

• Disconnect power and turn off water supply before servicing
• Access the boot and inner clamp by removing the front panel/outer retainer as required by your model
• Note gasket orientation; seat it evenly on the tub lip, then tighten the new clamp uniformly
• After reassembly, run a short fill/rinse cycle and check for leaks

This is a replacement bolt designed to secure a counterweight to the appliance frame, restoring proper balance and reducing noise or vibration. Replaces the worn or missing fastener so the weight stays firmly attached. What it does:

• Secures the counterweight to the appliance frame so the weight remains stable during operation
• Helps reduce loud banging, excessive vibration, or movement caused by a loose or missing bolt
• Restores correct alignment of the counterweight for smoother cycles and safer operation
• Simple, direct fastener—used where the counterweight mounts to the cabinet or support bracket

• One replacement bolt for the counterweight

• Intended for experienced DIYers; verify the counterweight location and mounting orientation before removing the old bolt
• Power off and unplug the appliance (or turn off circuit breaker) before starting work
• Use the correct socket or wrench and proper torque per manufacturer specs if available; do not overtighten
• If the counterweight or mounting hardware is damaged, replace damaged components rather than relying on a single bolt

This flat washer fits with the refrigerator counterweight assembly to provide a stable, low-profile spacer and load distribution point. It helps secure the counterweight and reduces metal-on-metal wear for smoother door movement. What it does:

• Provides a flat bearing surface between the counterweight and mounting hardware
• Distributes load to prevent localized wear and help maintain door alignment
• Reduces metal-on-metal contact that can cause noise or abrasion
• Maintains proper spacing so the counterweight operates smoothly

• Follow the appliance manufacturer's service instructions and remove power before servicing
• Replace washer if bent, corroded, or worn to restore proper counterweight function
• Use the exact part number to ensure fit with the counterweight and mounting hardware

This tub front is the dryer's front bulkhead that supports the drum and helps keep the drum aligned for smooth, quiet operation. Replacing a damaged or worn tub front restores proper drum support and reduces rubbing or noise. What it does

• Holds and positions the drum at the front of the dryer to maintain correct clearance
• Provides mounting for seals, rollers/bearings, and the front drum edge
• Helps prevent air and lint leaks at the front of the cabinet
• Commonly replaced when you see loud rubbing, scraping, drum misalignment, or visible damage to the front bulkhead

• One tub front

• Disconnect power before beginning any repair
• Basic mechanical skills and common hand tools required; cabinet disassembly is usually necessary
• Inspect and replace related wear items (seals, rollers, bearings) if damaged or worn
• Follow factory service instructions for torque and alignment when reinstalling

This tub fill hose directs incoming water from the inlet to the washer tub and includes a clamp for a secure connection. It restores proper water flow and prevents leaks at the tub connection point. What it does:

• Replaces a worn, cracked, or leaking fill hose to stop water drips and pooling.
• Ensures a sealed path for incoming wash water to reach the tub during fill cycles.
• Helps prevent water damage and maintains consistent fill performance.
• Compatible with standard tub inlet connections where this clamp-style hose is used.

• One tub fill hose with one tub clamp as shown.

• Disconnect power and water supply before starting any repair.
• Confirm orientation and seating of hose on the tub inlet; tighten clamp securely but avoid overtightening.
• Inspect surrounding hoses and fittings while replacing; replace any brittle or damaged components.

This basket and trunion assembly restores proper support and movement for the dishwasher's lower rack so it rolls and locks in place reliably. It replaces the worn or damaged lower rack pivot and support components. What it does:

• Supports the lower rack and provides the pivot/trunion that lets the rack roll in and out smoothly
• Keeps the basket aligned so dishes stay level during wash cycles
• Replaces cracked or broken trunions that let the rack sag or fall off the track
• Helps prevent rack wobble and uneven rack movement that can cause clanging or poor wash coverage

• One basket and trunion assembly

• Disconnect power (and water supply if required) before beginning any service
• Remove the lower rack to access and replace the assembly; basic hand tools are typically all that's needed
• Align the trunion and secure per the original mounting; do not force plastic parts into position

This baffle directs airflow and shields internal components in the oven/microwave cavity for safer, more consistent cooking and ventilation. It replaces a damaged or missing baffle to restore proper airflow and protect internal parts from debris. What it does:

• Directs and evens airflow inside the cooking cavity to promote consistent heating
• Shields internal components from food splatter and debris
• Helps reduce rattling or abnormal airflow noises caused by loose or broken baffles
• Prevents direct contact between food/objects and sensitive internal parts

• One replacement baffle

• Disconnect power (unplug unit or shut off breaker) and allow the appliance to cool before starting
• Installation typically requires removing the cavity trim or access panel and fastening the baffle with screws or clips
• Handle the part gently to avoid bending; ensure the baffle seats fully and fasteners are secure

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fit and helps prevent noise or loose parts caused by missing or worn fasteners. What it does:

• Secures trim, panels, or internal components to maintain proper alignment
• Helps prevent vibration and rattling from loose assemblies
• Replaces a missing or damaged screw to restore original fit
• Compatible with the factory mounting points where this screw is specified

• Always disconnect power to the appliance before servicing
• Use the correct screwdriver bit to avoid stripping the head
• Thread carefully and do not overtighten; snug until secure
• Keep small parts away from children and pets

This heating element bracket secures the oven's heating element in place so the element stays aligned during use, maintaining safe operation and consistent cooking performance. What it does:

• Anchors the bake/broil heating element to the oven cavity or rear wall to prevent sagging or movement
• Helps maintain proper element alignment for even heating
• Prevents the element from contacting other parts and reduces the chance of noise or vibration
• Commonly replaced when the element is loose, rattles, or shifts out of position

• Disconnect power at the breaker or unplug the appliance before starting
• Remove oven panels or element access cover as needed to reach the bracket
• Handle the heating element gently; avoid bending or damaging the element during installation
• Use original screws or fasteners and ensure the element is properly seated before restoring power

This damper pin secures and positions the refrigerator's air damper, helping control airflow between compartments for more consistent temperatures. It replaces a broken or missing pin to restore proper damper movement and airflow control. What it does:

• Holds the air damper linkage in place so the damper opens and closes correctly
• Helps restore balanced airflow between fresh food and freezer compartments
• Commonly replaced when the damper is loose, broken, or does not move smoothly
• Prevents the damper from slipping out of alignment and causing uneven temperatures

• One replacement damper pin

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing interior panels or the damper housing; keep track of fasteners
• Handle plastic damper components carefully to avoid cracking; use appropriate hand tools

The Bolt is an OEM part for GE washers. This small but important part is a circular thin ring that distributes the load when tightened between a nut and the bolt head or workpiece surface. Proper washers are crucial to prevent damage and ensure secure, rattle-free connections during years of vibration. 

Causes of a bad bolt can include wear due to normal mechanical stress, or deformation from overtightening bolts.

Symptoms of a bad bolt include:

• Noisy or loose connections between cabinet panels or internal components  
• Stripped or damaged bolt threads
• Vibrations transmitted during operation
• Potential leaks around sealed areas

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replacing worn bolt washers helps reduce noise and maintain a well-built feel to the washer for long-lasting performance.
 

This stator plate is the stationary motor mounting plate that positions and supports the motor assembly to keep the rotor aligned and operating smoothly. It restores proper motor alignment and helps reduce rubbing or vibration. What it does:

• Secures and aligns the motor/stator assembly inside the appliance
• Provides a stable mounting surface to keep the rotor centered for smooth rotation
• Helps prevent rubbing, excessive vibration, and abnormal noise when damaged or bent
• Replaced when motor alignment issues or mounting damage are present

• One stator plate

• Verify correct orientation before tightening fasteners
• Disconnect power to the appliance before servicing to avoid shock or injury
• Inspect surrounding motor components and fasteners; replace any damaged hardware as needed
• Tighten mounting screws to secure the plate but avoid over-torquing which can bend the plate

This rotor is the rotating element from the motor assembly that enables normal mechanical operation and helps reduce noise and vibration. Replacing a worn rotor can restore proper rotation and performance. What it does:

• Spins inside the motor to transfer torque to the drivetrain or drum
• Replaces a damaged or worn rotor that can cause grinding, scraping, or loud operation
• Helps eliminate intermittent or complete loss of rotation when the rotor is the failing component
• Works as a direct-fit replacement when the OEM part number matches

• One rotor

• Disconnect power before beginning any repair to avoid shock or injury
• Replacement may require motor removal or partial disassembly
• Inspect related motor components (bearing, stator, mounting hardware) and replace as needed

This stator is the stationary motor coil that creates the magnetic field needed for the washer's drive motor to turn. Replacing a worn or damaged stator helps restore proper motor operation and movement. What it does:

• Generates the magnetic field the rotor needs to spin the drive motor
• Supports normal agitation and spin functions by enabling motor torque
• Commonly associated with symptoms such as no spin/agitate, humming, or intermittent motor operation
• Works with the motor assembly and related electrical connections to transfer power to the rotor

• One stator (motor stator coil) as shown

• Disconnect power before beginning any repair to avoid shock hazard
• Installation typically requires removing the washer cab, motor housing, and associated wiring
• Inspect the rotor, motor bearings, and wiring harness while replacing the stator
• Use proper tools and follow safety procedures

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rotor bolt and washer kit secures a rotating assembly so the rotor or drum spins reliably. It replaces a missing or worn bolt/washer to restore correct alignment and reduce noise or wobble. What it does:

• Secures the rotor or rotating assembly to the shaft to maintain proper rotation
• Prevents the rotor from loosening, which can cause vibration or wobbling
• Helps stop grinding, rattling, or metal-on-metal noise from a loose rotor
• Restores correct spacing and alignment for smooth operation

• Disconnect power (unplug the appliance or shut off breaker) before servicing
• Remove the applicable access panel or assembly
• Replace only with the exact part number to ensure fit; tighten to OEM torque if specified

This is a replacement stator mounting bolt used to secure the stator assembly to the appliance chassis, keeping the motor components firmly in place for reliable operation and reduced vibration. What it does:

• Secures the stator to the motor/chassis assembly to maintain proper alignment
• Prevents movement or loosening that can cause vibration, noise, or motor performance issues
• Restores factory mounting hardware after repair or stator replacement
• Small part that plays a key role in safe, stable motor operation

• One stator mounting bolt (quantity: 1)

• Intended for technicians or experienced DIYers; inspect surrounding hardware and mounting holes before installing
• Use the correct thread engagement and torque per manufacturer specs; do not overtighten
• Disconnect power and follow all safety procedures before accessing the motor or chassis
• Replace all affected fasteners to ensure secure mounting

This internal drain hose routes defrost and condensate water from the evaporator to the refrigerator drain pan to prevent pooling and ice buildup. It's a direct-fit replacement designed for proper water flow inside the cabinet. What it does

• Channels defrost water away from the evaporator and freezer compartment to the drain pan
• Helps stop water pooling on shelves, in drawers, or on the freezer floor
• Reduces ice buildup caused by clogged or damaged drain tubing
• Restores normal drainage when original hose is cracked, pinched, or separated

• One internal drain hose

• Disconnect power to the appliance before starting any repair
• Remove food and any shelving that obstructs access to the evaporator area
• Ensure the drain path is clear and the hose is routed without sharp bends or kinks
• Use existing clamps or replace with an appropriate clamp; test by pouring a small amount of water into the evaporator area to ensure proper flow

This clamp secures the tub-to-internal drain hose connection to help prevent leaks and maintain proper drainage. A simple replacement when the original clip is corroded, broken, or no longer holds the hose tight. What it does

• Secures the drain hose to the tub/internal fitting to maintain a watertight connection
• Helps prevent water leaks and dripping from the hose junction
• Reduces risk of water pooling under the appliance or water damage during drain cycles
• Can resolve symptoms like intermittent leaking or a hose that slips off under pressure

• One tub-to-internal drain hose clamp

• Disconnect power to the appliance and turn off the water supply before beginning.
• Access the clamp via the washer's access panel or cabinet per your model's service instructions.
• Replace the clamp with the original orientation; use the appropriate pliers or clamp tool to secure without over-stressing the hose.
• Reassemble panels and run a short drain test to ensure there are no leaks.

This clamp secures the refrigerator's internal drain hose to the air chamber so defrost and condensation water drains properly, helping prevent leaks and water buildup inside or beneath the appliance. What it does

• Fastens the internal drain hose to the air chamber to keep the drain connection sealed
• Helps direct defrost and condensation water into the drain system, reducing pooling
• Can stop common symptoms like water under the fridge, dripping inside compartments, or ice buildup from poor drainage

• One hose-to-air chamber clamp

• Disconnect power before servicing to avoid shock or injury
• Access may require removing interior panels or the evaporator cover
• Use pliers or a screwdriver as appropriate to remove and reinstall the clamp; avoid overtightening to prevent hose damage
• Inspect the hose and fittings for cracks or blockages while replacing the clamp

This is a flexible pressure sensor hose designed to carry a small water/ or air-pressure signal between the appliance pressure sensor and the valve/manifold. It restores reliable pressure feedback for proper dispenser and ice system operation. What it does

• Transfers pressure/air signal from the valve/manifold to the pressure sensor so the control can detect proper water/ice fill.
• Helps prevent false pressure readings that can cause dispenser or ice maker fill problems.
• Commonly replaced when the hose is cracked, collapsed, or disconnected and causing inconsistent dispenser or ice performance.
• Fits in-line with the existing sensor and tubing—matches OEM shape and length for correct routing.

• Install only when the appliance is unplugged and water supply is shut off to avoid electrical shock or water leaks.
• Ensure both ends are seated fully and secured with the original clamps or retaining fittings to prevent air/water leaks.
• Inspect adjacent fittings and sensors for damage; replace any brittle or cracked parts to ensure a proper seal.

This external drain hose carries used water from the washer to your household drain. Replace a cracked, leaking, or kinked hose to restore proper draining performance and help prevent water spills during the drain cycle.

• Routes wastewater from the washer's drain outlet to a standpipe or sink
• Helps maintain a watertight path when correctly seated and secured
• Typical symptoms of a bad hose: leaks at the rear or floor, visible cracks/kinks, slow or incomplete draining

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Transfer any brackets or clamps from the old hose; push connections fully home and secure
• Route to the manufacturer-recommended standpipe height; avoid kinks and sharp bends
• Run a short fill/drain test and check all connections for leaks

This external drain hose base clip secures the dishwasher drain hose to the base, keeping the hose seated and reducing movement that can lead to leaks or poor draining. It's a small, inexpensive fix that helps maintain proper hose routing. What it does:

• Holds the drain hose in place at the base to prevent the hose from slipping or detaching
• Helps keep the hose routed to avoid kinks that can restrict drainage
• Reduces the chance of water dripping or pooling from a loose hose connection
• Commonly used when the hose clip is broken, missing, or no longer grips securely

• One external drain hose base clip

• Disconnect power to the appliance before starting work; follow all safety precautions
• Access the clip through the lower access panel or kickplate as required by your model
• Remove the old clip and press the replacement clip into position until it snaps securely around the hose
• Inspect the hose and adjacent fittings for damage and replace if necessary

The Drain Pump is an OEM part for GE washers. This part is responsible for removing water from the tub during the drain cycle, preventing water from remaining in the tub.

A bad drain pump can occur due to motor failure, clogs, or damage to the pump itself. If you notice symptoms such as slow or inadequate drainage, loud or unusual noises during the drain cycle, or water remaining in the tub after the cycle is complete, it may be time to replace the drain pump.

Symptoms of a bad drain pump include:

• Slow or inadequate drainage
• Loud or unusual noises during the drain cycle
• Water remaining in the tub after the cycle is complete

Ensure smooth drainage by replacing the faulty drain pump with this genuine part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
 

This tub-to-pump hose clamp secures the washer drain hose connection between the tub and pump to help prevent leaks and ensure proper drainage. It's a direct-replacement fastening clip used where the tub hose meets the pump inlet. What it does:

• Holds the tub-to-pump drain hose firmly on the pump or tub fitting to stop leaks.
• Keeps the hose sealed under normal wash and drain cycles to maintain proper drainage.
• Commonly replaced when clamps are rusted, broken, or no longer hold tension, causing water to leak near the pump area.

• Disconnect power and water supply and drain the washer before starting work.
• Access may require removing the washer access panel or cabinet—follow manufacturer service instructions.
• Use appropriate pliers or a clamp tool; install so the clamp fully encircles the hose and fitting without pinching the hose.
• Check for leaks after reassembly and run a short drain cycle; replace the hose if it shows cracks or wear.

This pump water release hose routes water from the pump to the drain, helping remove excess water quickly and reliably. It replaces worn or damaged hoses to stop leaks and restore proper draining. What it does:

• Channels discharged water from the pump to the drain path
• Prevents pooling behind panels and under the unit when functioning correctly
• Commonly replaced when cracked, split, collapsed, or leaking
• Helps resolve symptoms like water leaks under the appliance or incomplete drainage

• Disconnect power and shut off water supply before servicing.
• Inspect hose routing and clamps; replace clamps if corroded or damaged.
• Ensure hose is free of kinks and properly seated on pump and drain fittings.
• Test for leaks after installation and before reassembling panels.

A small service plug that seals the washer drain/pump housing and gives a service access point to release trapped water during maintenance. Helps contain water when installed and provides a way to drain the pump without removing the entire assembly. What it does

• Seals the pump/drain housing to prevent leaks from the service access point.
• Provides an access port for releasing or draining residual water during repair or maintenance.
• Enables easier removal of trapped debris or small clogs near the pump inlet.
• Restores a watertight service opening when properly installed.

• Disconnect power and shut off water supply before servicing the appliance.
• Drain remaining water from the tub or pump area before removing the plug to avoid spills.
• Hand-start threading then tighten securely; do not overtighten to avoid damaging the housing.
• Inspect sealing surfaces and replace any worn gaskets or O-rings to ensure a watertight fit.

A replacement connection bracket that secures and aligns adjacent appliance panels and components to restore stable mounting and prevent movement. Fits where a small metal bracket is used to join or support parts. What it does:

• Provides a secure mounting point to hold panels, trim, or components together
• Restores proper alignment to reduce rattling, vibration, or gaps between parts
• Helps maintain structural support for attached components during use
• Works as a simple mechanical connector where factory brackets have corroded or broken

• One connection bracket

• Disconnect power (and water, if applicable) before starting any repair to avoid shock or injury
• Retain and reuse original mounting hardware when possible; replace missing screws with equivalent size and type
• Position bracket to align holes before tightening fasteners to prevent misalignment

This heater shield protects the dryer's heating assembly and nearby components from direct heat, helping maintain safe operation and prevent heat damage. It fits behind the dryer drum near the heating element. What it does

• Shields surrounding parts from direct radiant heat produced by the heating element.
• Helps maintain consistent airflow by keeping heat directed through the drum and vent path.
• Commonly replaced when bent, cracked, or corroded, or it contacts the heating element and causes noise or uneven drying.
• Can prevent heat-related damage that lead to blown thermal fuses or warped nearby panels.

• One heater shield as shown.

• Disconnect power (unplug electric dryer or shut off breaker) before servicing to avoid shock.
• Basic disassembly of the dryer cabinet or back panel is typically required; keep fasteners organized.
• Inspect surrounding components (heating element, mounting clips, insulation) and replace any damaged parts.
• If you see scorched insulation or damaged wiring.

This motor harness fixture is the replacement wiring harness assembly that secures electrical connections to the motor and restores stable power delivery. It helps re-establish reliable motor operation and reduces arcing or intermittent failures. What it does

• Provides the correct connector and wiring routing to attach the motor to the appliance's main wiring
• Replaces frayed, burned, or damaged motor wiring that can cause intermittent motor operation
• Prevents loose connections that lead to sparking, noise, or motor shutdowns
• Helps restore proper electrical contact so the motor can run consistently

• One motor harness fixture

• Disconnect power (unplug or shut off breaker) before attempting any repair
• Verify the connector orientation and match wire colors/positions before connecting
• Inspect nearby wiring and strain relief; replace any damaged components to prevent repeat failures

This spray nozzle directs wash water toward glassware to help improve rinsing and reduce spotting. It replaces a worn or broken nozzle to restore the dishwasher's intended spray pattern for delicate items. What it does:

• Directs a focused water spray toward glasses and stemware for better rinsing.
• Helps reduce water flow loss from a cracked or clogged nozzle.
• Commonly replaced when glassware is not being cleaned or rinsed properly.
• Compatible with the dishwasher's spray arm assembly where the nozzle mounts.

• One spray nozzle to glass (single nozzle as shown).

• Disconnect power and water supply before servicing the dishwasher.
• Access may require removing the upper spray arm or tub components; handle plastic parts gently to avoid damage.
• Clean surrounding fittings and check for debris before installing the new nozzle.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.