Parts for Kitchenaid KUDF204EPA00: 04 - Upper Drawer Parts

The Whirlpool EveryDrop Refrigerator Water Filter 6 is an OEM part for Whirlpool refrigerators. This water filter is designed to reduce contaminants in the water supply, such as chlorine, lead, and other harmful substances, ensuring clean and safe drinking water and ice. It provides up to six months of filtration before needing replacement.

Causes of a bad water filter can include the end of its lifespan, clogging from excessive contaminants, or damage from improper installation. Over time, filters lose their effectiveness as they reach their capacity to absorb impurities.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in water and ice
• Cloudy or discolored water
• The filter indicator light on the refrigerator signaling a replacement

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This gasket forms a tight seal between appliance components to prevent leaks and air gaps. Replacing a worn or damaged gasket helps maintain proper operation and can reduce moisture issues and performance loss.

• Creates a reliable seal between mating surfaces to contain water or air as designed
• Helps maintain proper performance by preventing leaks and drafts at the interface
• Common failure signs: visible cracks, flattening, gaps, or tearing of the seal
• Helps resolve water drips, moisture/condensation, or poor sealing around the joint

• Disconnect power and, if applicable, shut off the water supply before servicing
• Remove the old gasket; clean and dry all mating surfaces thoroughly
• Seat the new gasket evenly without stretching; ensure corners and edges are fully engaged
• Gently warm the gasket to improve flexibility, then test for a proper seal

This screw is a factory replacement fastener used to secure panels, trim, and internal components so parts stay aligned and appliances operate safely. It restores original fit where a missing or damaged screw causes loose panels or rattling. What it does:

• Secures cabinet panels, brackets, or trim pieces to restore solid fits
• Prevents vibration-related noise and movement caused by missing fasteners
• Replaces stripped or corroded screws that won't hold parts safely
• Matches OEM fastening points for correct installation when replacement is needed

• Use the correct screwdriver and size to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance-specific safety steps before working on electric components
• Replace them as needed for full panel stability

This replacement mounting screw secures appliance panels and components so parts stay aligned and stable during use. A simple, direct fastener that restores proper fit and prevents rattling or loose trim. What it does

• Secures panels, brackets, or trim to the appliance frame
• Restores proper alignment and prevents vibration or rattling noises
• Keeps parts from shifting, reducing wear on connected components
• Works wherever the original screw was used to hold assemblies in place

• Disconnect power and/or water before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or crack plastic
• Keep track of removed fasteners and replace like-for-like for best fit

This replacement oven bottom plate protects the oven floor from spills and direct flame contact while helping maintain even heat across the cooking surface. It restores the oven interior to a clean, finished condition. What it does

• Shields the oven floor from spills, drips and food debris to simplify cleanup
• Helps distribute heat more evenly across the oven cavity for consistent cooking
• Prevents direct contact between cookware and heating elements to reduce burn spots
• Replaces a cracked, warped or heavily corroded plate that can affect oven performance

• Disconnect power to the appliance before servicing to avoid electrical shock
• Allow the oven to fully cool before removing or installing the plate
• Use basic hand tools and avoid forcing clips or fasteners to prevent damage

The Harness-Wire is an OEM part for Whirlpool refrigerators. It serves as the internal electrical wiring backbone, safely routing current through a protective casing between key modules. Strategically placed grommets prevent wire chafing or breaks.  

Causes of harness issues can include wear from continuous operation, flexing wires developing breaks, damage during repairs, or physical stress like pinching or pulling.

Symptoms of a bad harness wire include:  

• Lights or modules failing to power on
• Inability to maintain set temperatures  
• Tripped breakers or blown fuses after repairs
• Intermittent operation of functions

This OEM replacement ensures stable, grounded connections to preserve proper fridge operations. Compatible models include those by Maytag, KitchenAid, and select Kenmore units.

This replacement part is a display. This part is found in ovens or ranges and is able to display the current settings of the device as well as things like the temperature and the timer. A new display might be needed if the user notices that the current part is no longer working properly. This can include being stripped from the machine or if the appliance can no longer stay attached.This is a genuine replacement part made by Whirlpool, sold individually. The item, made of durable materials, is meant to last a long time.

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

This oven door gasket creates a tight seal between the oven door and cavity to help contain heat for more even cooking and reduce energy loss. It replaces a worn or damaged seal to restore proper door closure and performance. What it does:

• Seals the oven cavity to help maintain correct cooking temperatures and reduce heat leakage.
• Helps prevent smoke and odors from escaping during use.
• Can improve bake and roast consistency when an old gasket is compressed or torn.
• Reduces external door heat, improving safety near the oven face.

• Allow the oven to fully cool and disconnect power before starting work.
• Remove the old gasket and clean the channel or retainer of debris before installing the new gasket.
• Press the gasket into the door retainer evenly around the perimeter; ensure the seal seats fully with no twists.

This rail assembly is the sliding track that lets a refrigerator drawer open and close smoothly, restoring proper drawer movement and alignment. It replaces damaged or worn drawer rails to reduce sticking and uneven operation. What it does:

• Provides a guided track for a refrigerator drawer to slide in and out
• Restores smooth, even movement when drawers are sticking or wobbling
• Keeps the drawer aligned to prevent dragging or uneven gaps
• Helps maintain proper drawer sealing and fit by correcting alignment issues

• Disconnect power or unplug the appliance and remove stored items before service
• Remove the drawer per the manufacturer's instructions to access the rail
• Use basic hand tools; align the rail carefully and secure all fasteners tight but do not overtighten