Parts for Whirlpool WFW862CHC2: Water System Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drain Hose is an OEM part for Whirlpool front-loading washers. This hose is responsible for transporting water from the washer tub out to the household plumbing drain.

Causes of a bad drain hose can include cracks developing over time due to the constant cycle of filling and emptying during normal operation. Mineral or lime buildup inside the hose may also cause blockages.

Symptoms of a bad drain hose include:

• Water not draining or draining slowly from the washer tub  
• Water remaining or collecting at the bottom of the tub after cycles
• Leaks occurring from cracks along the hose

This OEM part is compatible with some KitchenAid, Jenn-Air, and select Kenmore models.

The Tub to Pump Hose is an OEM part for Whirlpool washing machines. This hose connects the washer tub to the pump, allowing water to flow between the two components.

The hose plays an important role in draining water from the wash tub after each cycle. It features a flexible yet durable design to withstand constant water pressure and prevent kinks that could block flow.

Causes of a bad hose can include cracks or splits from extended use, corrosion of connectors over time, or accidental punctures.

Symptoms of a bad hose include:

• Incomplete or slow draining of water after cycles
• Puddles or leaks near the pump or tub area
• Wet clothes indicating standing water issues
• Strange noises during draining phases

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

• Tightens around a hose and fitting to maintain a secure seal
• Helps stop drips, seepage, or loose connections
• Common fix when you see moisture around a hose joint
• Useful if a clamp is rusted, stretched, or no longer holding tension

• Unplug power and shut off water (if applicable) before servicing
• Note clamp position/orientation before removal
• Use appropriate screwdriver or nut driver to tighten evenly
• Do not overtighten—ensure a snug, leak-free seal without damaging the hose

The Hose is an OEM part for Whirlpool washing machines. As an integral part of the water inlet system, this reinforced rubber hose transports water from the home's supply lines into the washer. 

Symptoms of a bad hose can include:

• Leaks or drips from hose connections 
• Visible cracks or bulges in the rubber material
• Kinked or overly stiff hose that resists bending
• Water flow issues causing improper fill levels

Causes may relate to minerals/scale buildup weakening the hose over time, accidental cuts or punctures from improper handling, or flex fatigue from repetitive use. 

This Whirlpool replacement hose is constructed of durable rubber for years of leak-free service. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine brands.

The Nozzle is an OEM part for Whirlpool washing machines. It spray clean water and detergent throughout the drum to thoroughly saturate clothes during cycles.

Common causes of replacement involve mineral deposits clogging spray ports over time or cracks reducing water pressure. Impacts from overloading or an imbalanced spin cycle may also damage plastic.

Symptoms include:

• Weak or incomplete water coverage of clothesloads
• Soap scum residue failure to rinse away fully
• Damp spots signifying poor absorption into fabrics
• Strange noises or shaking from uneven fluid dispersal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Pump is an OEM part for Whirlpool laundry machines. It is responsible for circulating water into and out of the washer during rotation cycles. The pump is designed for reliable and high water pressure output to effectively wash clothes. 

Symptoms of a bad water pump include:

• Reduced or no water filling the washing machine tub
• Loud buzzing or grinding noises coming from the pump motor area
• Does not enter or remain in agitation cycles properly 

Causes of a bad water pump can be wear and tear over time, blockages that reduce water flow, or failure of electronic components that control the pump.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The FILTER is an OEM component designed specifically for select Whirlpool washing machines. This filter helps trap debris and reduces messes during the wash cycle. 

Causes of a bad filter can include a buildup of trapped debris over time, tears or cracks in the filter material from excess strain or rough handling, or damage to the mounting brackets.  

Symptoms of a bad filter include:

• Reduced water pressure during fills 
• Extended cycle times as the pump has to work harder
• Soiled or dirty clothing after washing due to debris passing through 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Please check your model specifications to ensure compatibility before purchase.

This replacement seal restores the appliance's sealing surface to help prevent leaks and maintain proper performance. It fits into the door/tub opening to re-establish a tight seal and reduce visible water or air escape. What it does:

• Forms a flexible sealing barrier around the appliance opening to help stop leaks.
• Keeps water, moisture, and common odors from escaping the appliance cavity.
• Helps maintain consistent internal conditions by closing gaps from worn or damaged seals.
• Common symptoms indicating replacement: visible cracks, tears, deformation, gaps, water pooling, or persistent odors.

• Always disconnect power and shut off water before starting work.
• Remove the old seal completely and clean the mounting surface before installing the new seal.
• Press the new seal evenly into the retainer/groove; avoid stretching or twisting the gasket.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Dispenser Metering Pump is an OEM part for Whirlpool washing machines. It dispenses laundry detergent at timed intervals during wash cycles.

Causes of a bad metering pump can include worn gears, seals or valves that result in improper detergent dispensing. Mineral buildup or internal blockages over time can also lead to malfunction.

Symptoms of a bad metering pump include:

• Detergent not being fully or evenly dispensed during wash cycles
• Residual detergent left in the drawer after wash completion
• clothes failing to get fully cleaned due to insufficient detergent dosage

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This switch-sensor is a replacement electrical switch assembly that detects and transmits a user or door input to the appliance control, helping restore proper control signaling and machine operation. What it does:

• Acts as an electrical input switch to tell the control when a button, lever, or door is in a specific position
• Helps resolve symptoms like controls that don't respond, intermittent operation, or failure to detect a door/position
• Restores reliable signaling between the user/door mechanism and the appliance control
• Used where a failed switch prevents normal start, selection changes, or safety interlocks from engaging

• One switch-sensor switch assembly

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Access typically requires removing a panel or bezel; handle clips and connectors gently to avoid damage
• Do not force the part into place

This O-ring is a simple circular seal that prevents water or air leaks where two appliance components meet. It restores a tight seal to help stop drips and maintain proper device operation. What it does

• Creates a watertight or airtight seal between mating parts to prevent leaks.
• Commonly used on valves, fittings, hoses, and service connections.
• Can stop symptoms like slow leaks, puddling under the appliance, or loss of pressure at a connection.
• Small wear, cracking, or flattening of the ring reduces sealing effectiveness.

• Inspect mating surfaces and grooves; clean debris before installing the new O-ring.
• Lightly lubricate with the correct appliance-safe lubricant if specified by the manufacturer.
• Replace any damaged fittings or housings that prevent a proper seal.
• Turn off water/electric supply and relieve pressure before servicing plumbing connections.

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

This is a replacement screw used to secure panels and components on compatible Whirlpool appliances. It restores proper fit and reduces rattling or loose trim so doors, panels and controls sit securely. What it does:

• Secures panels, brackets or trim to the appliance cabinet
• Restores proper alignment and tightness where a missing or damaged screw causes looseness
• Helps eliminate vibrations and rattling caused by loose fasteners
• Matches OEM thread and head style for a proper fit in the intended mounting hole

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Turn off power to the appliance before working near electrical components
• Replace any damaged or stripped mating hardware for a secure repair

This factory fastener secures appliance components such as panels, brackets, and handles. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and helps keep parts aligned for smooth, reliable operation.

• Secures components to the appliance frame or assemblies
• Helps maintain alignment and structural stability
• Replaces missing, rusted, or stripped hardware
• Common symptoms include loose/wobbly handles or panels, rattling/vibration noises, or a visibly missing screw

• Disconnect power before servicing
• Use the correct driver/bit and start threads by hand to avoid cross-threading
• Do not overtighten; snug until secure
• Replace any that are corroded or stripped for an even hold

This genuine OEM magnet helps the appliance door seal stay securely closed to maintain proper temperature and efficiency. It replaces a worn or damaged magnet to restore normal door retention and reduce cold air loss. What it does:

• Holds the door closed by providing magnetic attraction along the door edge or latch area
• Helps maintain internal temperature and prevents warm air infiltration
• Commonly replaced when the door fails to stay shut or seals don't align
• Reduces excess run time caused by a door that won't fully latch

• Disconnect power to the appliance before performing work
• Remove the door gasket or trim as needed per your model's service instructions to access the magnet
• Handle the magnet carefully; sharp edges or adhesive backing may be present
• Keep magnets away from pacemakers, credit cards, and sensitive electronics during installation

The Tank is an OEM part for Whirlpool washing machines. It properly dispenses detergent during the wash cycle.

Causes of a bad detergent tank can include: cracks, holes or other damage that cause leakage or improper detergent dispensing. Scaling or mineral buildup inside the tank over time may also lead to detergent dispensing issues.

Symptoms of a bad detergent tank include:

• Detergent not being fully dispensed or released during the wash
• Residue or leftover detergent remaining in the tank after cycles
• Clothes not getting properly cleaned due to insufficient detergent release

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.

Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.

Symptoms of a bad spring tension hose clamp include:

• Water leaks around hose connections
• Loose or disconnected hoses
• Unusual noises or vibrations during operation
• Water pressure issues within the washing machine

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.