Knob, Dial & Button

This control knob restores secure, tactile operation to a damaged or missing appliance control. It makes setting selection easy and helps return the control shaft to safe, predictable use. What it does:

• Replaces a worn, cracked, or missing control knob to restore manual control
• Provides a firm grip and detent feedback for accurate setting selection
• Fits directly onto the control shaft to enable normal operation of the control
• Useful when a knob is loose, won't turn, or is cosmetically damaged

• Disconnect power (unplug or turn off breaker) before servicing electrical appliances
• Pull the old knob straight off the control shaft and push the replacement on until fully seated
• If the new knob won't seat, inspect the control shaft and any retained insert for damage before forcing

This replacement knob controls the AccuSimmer surface burner on select ranges/cooktops. It restores smooth, accurate setting selection—including delicate simmer—when the original knob is cracked, stripped, loose, or missing.

• Provides user control to turn the burner on/off and set heat levels, including low AccuSimmer settings
• Common symptoms: cracked or missing knob, loose or free-spinning fit, or worn markings that make settings hard to read
• Helps restore proper feel, alignment, and readability at the burner control
• Note: A damaged or deformed valve stem will prevent proper operation even with a new knob

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; align the new knob with the stem and press straight on until fully seated
• Ensure both the valve and the new knob are set to Off before installation
• Do not force; if resistance is excessive, inspect the valve stem for damage

Replacement thermostat knob that restores clear, reliable temperature control on compatible GE appliance controls. Use this knob to replace a cracked, loose, missing, or worn control knob so temperature settings are easier to select and hold. What it does:

• Replaces a worn or damaged thermostat/control knob to restore tactile grip and detent action for accurate setting selection.
• Provides a secure push-on fit to operate the thermostat/control shaft and adjust temperature settings.
• Common symptoms corrected: knob won't turn, knob slips on the shaft, wobbling/loose knob, cracked or missing knob.
• Helps prevent accidental temperature changes by restoring proper knob engagement.

• Always disconnect power to the appliance and allow surfaces to cool before servicing.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the replacement knob onto the shaft until fully seated.
• If the knob does not seat easily, verify spline orientation and shaft condition; do not force or hammer the knob into place.

This control knob replaces a worn, cracked, or missing range/stove dial so you can select heat and settings with a secure grip and clear position indicator. It restores normal operation of the control shaft. What it does:

• Fits onto the control shaft to turn the burner/oven setting and indicate the selected position.
• Restores a solid grip and visible pointer for precise adjustments.
• Common symptom fix: knob is loose, stripped, cracked, or missing and won't turn or hold a setting.
• Helps avoid accidental setting changes from a damaged or worn knob.

• Disconnect power to the appliance before service to avoid shocks or accidental heating.
• Pull the old knob straight off the control shaft; line up splines and push the new knob onto the shaft until fully seated.
• Do not force or hammer the knob onto the shaft; if it does not seat easily, verify spline alignment.
• If the control stem or switch is damaged, replace the stem/switch assembly rather than forcing a knob.

This thermostat knob is the control dial used to set temperature on compatible ranges and ovens, restoring a clear pointer and easy grip when the original knob is cracked, faded, or missing. It provides a simple, user-facing control for the appliance thermostat. What it does:

• Turns the thermostat control shaft to select cooking temperature settings.
• Replaces cracked, worn, broken, loose, or missing knobs that make temperature adjustments difficult.
• Restores a visible pointer/indicator for accurate temperature selection.
• Improves grip and tactile feedback for safer, easier temperature changes.

• Turn appliance controls OFF and cool before replacing the knob.
• Remove the old knob by pulling it straight off the control shaft; align the new knob splines with the shaft and push on until fully seated.
• If the knob is stuck, use gentle rocking while pulling; do not pry on surrounding surfaces or force the shaft.

This white replacement control knob restores a secure grip and clear setting indicator on an appliance control panel. It lets you select temperatures, cycles, or functions accurately when the original knob is cracked, loose, or missing. What it does:

• Fits onto the control shaft to rotate and select settings on the appliance control panel.
• Provides a visible indicator to line up the desired temperature, cycle, or function.
• Replaces knobs that are cracked, stripped, loose, missing, or no longer engaging properly.
• Simple cosmetic and functional replacement to restore user control without replacing the entire control assembly.

• Disconnect power to the appliance before performing any service.
• Pull the old knob straight off the control shaft; press the replacement knob onto the shaft, aligning the indicator to the selected setting.
• If the knob does not pull off or push on easily, check for a retaining clip or set screw.

This genuine control knob provides a simple, tactile replacement for a damaged, worn, or missing appliance control. Restores a secure grip and precise control so settings are easy to read and adjust. What it does:

• Replaces a cracked, loose, stripped, or missing control knob so you can safely change settings
• Fits over the appliance control shaft and provides a clear pointer for accurate selection
• Restores tactile feedback for smooth turning and reliable position stops
• Helps prevent accidental setting changes from slipping or worn grips

• Disconnect power to the appliance before installing to avoid injury
• Pull off the old knob straight from the control shaft; align splines and push the new knob on until fully seated
• If the old knob is stuck, use a gentle, even pulling force or a plastic knob puller to avoid damaging the control shaft

A white rotary control knob that restores user control of temperature or function settings on compatible appliances. Replaces a cracked, worn, or missing knob to make turning dials easier and safer. What it does

• Replaces a damaged or missing dial so controls can be selected and adjusted smoothly.
• Fits splined control shafts to transmit user input to the switch or timer.
• Common symptom fix: knob slips, spins freely, is cracked, or does not engage the shaft.
• Works for front-panel or console-mounted rotary controls on ranges, ovens, or similar appliances.

• Disconnect power to the appliance before servicing to avoid electric shock.
• Align the knob's internal spline with the control shaft; push straight on until seated.
• Do not force the knob; inspect the control shaft and inner spline for damage before installing.

Color: White

This white top valve knob is a direct-fit replacement control knob for range/stove surface burners. It restores a secure grip and clear control over the burner valve so you can select flame or heat settings more easily. What it does:

• Replaces cracked, worn, missing, or discolored surface burner control knobs
• Fits onto the valve stem to provide a positive grip for turning burner controls
• Helps prevent slipping or spinning on the valve stem during use
• Visible cosmetic refresh for the cooktop control area

• Make sure all burners are off and the appliance is cool before replacing the knob
• Align the knob splines with the valve stem and push straight on until fully seated
• If the knob does not seat or turns loosely, inspect the valve stem for damage; do not force
• If you smell gas or suspect a valve leak, stop.

Color: White.

This control knob replaces a worn, cracked, or missing range/oven control knob to restore safe, precise selection of heat and function settings. It gives a secure grip and a clear tactile stop for common range controls. What it does:

• Fits onto the range/oven control shaft to select temperature or function settings
• Provides a positive grip and stop so settings stay where you set them
• Replaces broken, stripped, cracked, or missing knobs that won't turn or won't stay set
• Helps restore proper user control for burner or oven functions

• Always disconnect power (unplug or shut off breaker) and shut off gas supply before servicing
• Pull the old knob straight off the control shaft; align and push the replacement knob onto the shaft until fully seated
• Don't force the knob; if it won't seat, inspect the control shaft and the knob opening for debris or damage

This replacement control knob restores safe, easy control of a range or oven function. It replaces a cracked, stripped, missing or hard-to-turn knob so you can set heat and settings with confidence. What it does:

• Replaces a worn or broken control knob that won't turn or won't stay in place
• Provides a secure grip for adjusting burner or oven settings
• Restores clear tactile feedback for setting selection
• Helps prevent accidental changes from loose or damaged knobs

• Push-on installation: align with the splined shaft and press firmly until seated
• For pull-off knobs, grasp and pull straight from the shaft; use a cloth to protect finish
• Turn off power/gas to appliance before servicing and follow appliance safety instructions
• If the shaft splines are damaged the knob may not seat properly; replace the control shaft.

This replacement control knob restores a secure grip and accurate selection of settings on your appliance's control shaft. Swap a cracked, stripped, or missing knob to keep everyday operation smooth, precise, and safe.

• Attaches to the control shaft to select temperature, cycle, or burner settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like a knob spinning freely, difficulty turning, or inability to choose a setting
• Restores normal feel and alignment when turning the control

• Unplug the appliance and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control shaft; avoid prying on the stem
• Align the new knob with the shaft and press firmly until fully seated
• Test operation to ensure smooth turning and proper engagement

Replacement surface unit control knob in white helps restore proper grip and accurate burner heat selection on stovetop ranges, improving control, safety, and overall appearance during everyday cooking. What it does

• Replaces a cracked, melted, loose, or missing knob so you can select burner heat settings safely and predictably.
• Fits standard splined control shafts used on many gas and electric cooktop infinite-switch controls.
• Restores tactile feedback and clear pointer position for precise temperature selection.
• Simple cosmetic upgrade that refreshes the look of the cooktop control panel.

• Disconnect power to the appliance before servicing; for gas ranges also shut off the gas supply if applicable.
• Remove the old knob by pulling it straight off the control shaft; align the splines and push the replacement knob firmly onto the shaft until fully seated.
• After installation, restore power and test each burner control to confirm proper operation.

This replacement control knob restores reliable control of a range or appliance's settings by providing a secure grip and clear indicator for selecting heat or function positions. It's a simple swap that makes worn, cracked, or missing knobs usable again. What it does:

• Fits onto the appliance control shaft to let you turn and set temperature or function positions
• Provides a visible pointer/indicator for accurate setting selection
• Replaces cracked, stripped, or missing knobs that are hard to grip or won't stay in position
• Restores proper tactile feedback and user control of the appliance

• One replacement control knob

• Disconnect power to the appliance or shut off the gas supply before servicing for safety
• Pull the old knob straight off the control shaft; align the replacement knob's splines with the shaft and push on firmly until seated
• If knob is tight, use steady pressure—do not hammer or use excessive force that could damage the shaft
• If the control shaft is damaged or loose, replace the control or shaft as needed