Knob, Dial & Button

This surface burner knob mounts to the cooktop control shaft so you can turn the burner on and choose the heat level. Replace a broken or stripped knob to restore safe, accurate control and a clean, finished look.

• Attaches to the burner valve or surface element switch shaft
• Provides on/off and heat-level selection
• Replaces knobs that are cracked, missing, loose, or stripped
• Helps keep settings aligned for consistent results

• Allow the cooktop to cool; switch off power at the breaker or shut off gas
• Pull the old knob straight off the control shaft—do not pry on the panel
• Align the new knob with the shaft shape and push straight on until fully seated
• If the shaft is worn or damaged, the valve or switch may require service

This humidity damper kit replaces the adjustable vent in your refrigerator's crisper cover. It restores proper airflow control so you can set high or low humidity for produce and reduce excess moisture or wilting. What it does:

• Regulates airflow at the crisper vent to raise or lower humidity levels
• Restores smooth slider/lever operation for accurate open/close of the damper
• Helps reduce condensation or pooling water in the crisper area
• Replaces broken, warped, or missing humidity vent parts

• One humidity damper kit (manufacturer-supplied damper/control components)

• Unplug the refrigerator; remove crisper drawers and lift out the glass cover/shelf
• Release tabs or screws to remove the old humidity control; note orientation of parts
• Install the new damper components and confirm the slider moves freely from Low to High
• Reinstall the cover and drawers; restore power and verify proper operation

This thermostat control knob lets you set the oven temperature by turning the thermostat shaft. Replace a cracked, stripped, or missing knob to restore secure temperature selection and a clean, finished look.

• Attaches to the oven thermostat shaft to select baking temperatures
• Replaces knobs that are cracked, stripped, loose, wobbly, or missing
• Can help when the knob slips, won't turn the shaft, or won't stay aligned during adjustment

• Disconnect power and allow the appliance to cool before servicing.
• Pull the old knob straight off the thermostat shaft.
• Align the new knob's opening with the shaft and press firmly until fully seated.
• Rotate through the full range to confirm smooth operation and alignment with panel markings.

Color: white. Measures about 2 inches in diameter.

This replacement control knob restores a secure, easy grip on the control shaft so you can adjust settings smoothly again. Use it to replace a worn, cracked, or missing knob and regain precise control. What it does:

• Attaches to the control shaft to operate a switch or variable control
• Provides a reliable handhold for adjusting settings
• Helps resolve issues like a cracked knob, loose fit, or knob that falls off
• Addresses difficulty turning the control or the control not responding when the knob is rotated

• 1 knob

• Disconnect power at the breaker or unplug the unit before servicing
• Pull the old knob straight off; if tight, gently pry while protecting the surface (loosen any set screw first if present)
• Align the flat (D) or splined shaft and press the new knob on fully
• Restore power and test operation

This replacement control knob restores reliable, easy adjustment of your appliance's settings. Use it when the original knob is cracked, stripped, loose, or missing to regain precise control and a secure grip. What it does:

• Re-establishes firm manual control for setting temperatures, cycles, or power levels.
• Replaces cracked, worn, or stripped knobs that slip or won't turn properly.
• Restores alignment of the selection indicator for accurate setting reference.
• Provides a direct fit onto the appliance's control shaft splines for secure operation.

• Always disconnect power to the appliance (and shut off gas for ranges) before servicing.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob won't seat easily or slips after installation, do not force it — inspect the control shaft splines for damage.

Color: White

This control knob lets you turn and select settings on the appliance for reliable user control and a secure grip. Replace cracked, worn or loose knobs to restore smooth selection and tactile feedback at the control panel. What it does:

• Fits onto the control shaft to allow setting adjustments and mode selection
• Restores a solid grip when the original knob is cracked, broken or slipping
• Helps stop the knob from spinning on the shaft or failing to engage detents
• Provides the tactile feel and alignment needed for accurate control selection

• Disconnect power (and gas for gas appliances) before servicing the control area.
• Remove the old knob by pulling it straight off the shaft; align any flat/keyed spline and push the replacement fully onto the shaft until seated.
• Many installations are tool-free; if the old knob is stuck, use a gentle puller or padded pry to avoid damaging the panel or shaft.

A replacement rotary control knob that restores reliable manual control of your appliance's temperature and function settings. Replace a cracked, worn, or missing knob to regain safe, precise control of the appliance. What it does

• Fits onto the appliance control shaft and lets you turn and select cooktop/oven functions and temperatures.
• Replaces knobs that are cracked, broken, loose, or that spin on the shaft and won't adjust settings.
• Designed to match the original knob spline pattern for a proper, secure fit.

• Disconnect power (and gas, when applicable) and make sure the appliance is cool before servicing.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the new knob on until fully seated.
• If the old knob is stuck, use a cloth for grip and gently rock while pulling—avoid excessive force.

Replacement white timer knob for oven or range controls, restoring a secure, easy grip for setting the timer and selecting cooking durations; designed to slip onto the control shaft for straightforward replacement. What it does:

• Provides a tactile grip to turn and set the appliance's mechanical or manual timer control.
• Restores positive engagement with the control shaft so settings stay set and adjustments feel firm.
• Common symptoms that indicate replacement: cracked, faded, loose, slipping, or a knob that won't turn.
• Intended for direct-replacement use on matching spline-style timer shafts; verify shaft shape before ordering.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing controls.
• Remove the old knob by pulling straight off the control shaft; avoid twisting or levering on fragile bezels.
• Align the knob splines with the control shaft and push firmly until fully seated.
• If the knob does not fit easily, stop and verify spline pattern and part number to avoid forcing and damaging the control.

This is a white on/off pushbutton that restores the user control for turning the appliance on and off. It replaces a worn, cracked, or missing button to make the control panel usable again. What it does:

• Acts as the primary on/off actuator on the appliance control panel
• Allows reliable on/off switching when pressed
• Replaces cracked, chipped, or non-responsive buttons
• Helps resolve symptoms like a loose, stuck, or missing on/off button

• One white on/off pushbutton

• Disconnect power to the appliance before attempting any service
• This button typically snaps into the control panel; use gentle prying to remove the old button
• Inspect the control panel bezel and switch mechanism for damage before installing

This replacement control knob mounts on the front control shaft of compatible cooking appliances. It lets you turn burners or oven functions on and adjust settings. Restore a clean look and positive, accurate control.

• Provides the hand control to select burner or oven settings and adjust heat/temperature
• Press-fits onto the control stem for a secure grip and precise rotation
• Common symptoms: cracked or broken knob, spins without moving the control, hard to read, missing
• Also replace if melted/warped or if the knob won't stay on the shaft

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off; do not pry against the control panel
• Align the new knob with the control stem and push straight on until fully seated
• If it doesn't seat easily, confirm the knob matches the stem shape and the specific control position

This is the control knob for a surface burner's mini valve. It fits over the valve stem so you can turn the burner on/off and adjust the flame level smoothly and safely.

• Rotates the burner's mini valve to control gas flow and flame size
• Replaces a cracked, stripped, missing, or melted knob
• Helps when the knob no longer engages the valve or is hard to turn
• Restores normal feel and control of the burner

• Disconnect power and shut off gas before beginning work
• Pull the old knob straight off the valve stem; align and press the new knob on
• Do not force—verify the flat/D orientation on the stem matches the knob
• Test burner operation and knob travel after installation

This replacement control knob fits the surface element infinite switch, letting you turn the burner on and choose the heat level. Replace a cracked, stripped, or missing knob to restore smooth, reliable control and a clean, matched finish.

• Attaches to the infinite switch stem to select burner settings from Off to High
• Restores proper feel and engagement when the original knob is worn or broken
• Common symptoms: knob splits, wobbles, falls off, is hard to turn, or won't engage the switch
• Color-matched white to blend with compatible control panels

• Disconnect power to the range/cooktop before servicing
• Pull the old knob straight off the switch stem; avoid prying on the control panel
• Align the new knob with the stem and press firmly until fully seated
• The pointer aligns to Off before restoring power

This dial installs on the refrigerator chill/pan control to let you set the compartment temperature. Replacing a broken or loose dial restores proper control and makes adjusting the chill drawer quick and reliable. What it does:

• Rotates on the chill/pan control shaft to change the compartment temperature setting.
• Replaces worn, cracked, or missing dials that are hard to turn or don't stay set.
• Helps address inconsistent deli/drawer temperatures when the control dial fails.
• Matches the original OEM shape for correct fit and alignment on the control shaft.

• Always unplug the appliance or shut power to the refrigerator before servicing.
• Remove the drawer/pan or access panel as needed to reach the control shaft.
• Pull the old dial straight off the shaft and press the new dial onto the shaft until fully seated; avoid forcing at an angle.
• After installation, restore power and verify the dial turns smoothly and adjusts the compartment temperature setting.