Parts for Frigidaire WRT13GRHD1: 02 - Door Parts

Color: White

The Freezer Door Gasket is an OEM part for Frigidaire refrigerators. This gasket creates a seal around the freezer door to prevent warm air from entering and cold air from escaping, ensuring the freezer maintains its optimal temperature.

Causes of a bad freezer door gasket can include wear and tear over time, exposure to harsh cleaning chemicals that degrade the material, or physical damage from frequent use or mishandling.

Symptoms of a bad freezer door gasket include:

• Noticeable gaps or cracks in the gasket
• Frost buildup inside the freezer
• Increased energy consumption
• The freezer door not closing properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Seals the fresh-food compartment to maintain proper cooling and reduce energy loss. Replace if worn, torn, or deformed to keep food fresher. Confirm fit.

Replaces the plastic interior liner on your refrigerator door. Needed when the original panel is cracked, warped, or damaged. Restores door bins support.

Note: In some applications, this door shelf bar requires you to cut the length to fit. Dimensions: Approximately 23.16" x 1.12"

White plastic bar that secures bottles and jars on your refrigerator door shelf. Replace if cracked, broken, or missing. May require cutting to fit.

Left side door shelf support. Color: White. Measures about 1 3/4 inch x 1 3/4 inch. For the right hand side order 3206150.

Left-hand door shelf end cap support secures refrigerator door shelves. Replace if cracked, broken, or missing to properly hold door bins in place.

The Right Hand Door Shelf Support is an OEM part for Frigidaire refrigerators. This support bracket holds the door shelf in place, providing stability and ensuring that items stored in the door compartment remain secure.

Causes of a bad door shelf support can include wear and tear from regular use, physical damage from overloading the shelf, or breakage due to impact when opening or closing the door. Over time, the plastic material can also become brittle and crack.

Symptoms of a bad door shelf support include:

• Door shelf sagging or detaching from the door
• Difficulty in securing items on the shelf
• Visible cracks or damage to the support bracket
• Items falling out when opening the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Right-hand door shelf support endcap for refrigerator door bins. Replaces broken, cracked, or missing supports that secure shelf bars to the door panel.

Note: In some applications, this door shelf bar requires you to cut the length to fit. Dimensions: Approximately 23.16" x 1.12"

Inner door panel for refrigerator freezer compartments. Replaces cracked, broken, or damaged interior door liners. Restores door appearance and structure.

White plastic hinge plug cover for freezer doors. Replaces cracked, broken, or missing decorative plugs that cover hinge mounting holes on the cabinet.

This part has been discontinued and is no longer available.

Refrigerator door stop that mounts to the cabinet to limit door swing and prevent damage. Replace if cracked, broken, or missing to protect your fridge.

Replaces missing, cracked, or broken plug button inserts on your dryer control panel. Restores proper appearance and button operation.

A replacement refrigerator door panel that restores the exterior finish and thermal barrier on compatible top-mount and side-by-side refrigerators. Matches almond finish and includes factory-applied insulation to help maintain proper internal temperatures. What it does:

• Replaces a dented, cracked or faded outer door surface to improve appearance.
• Restores the door's insulating layer to help maintain fridge temperature and efficiency.
• Provides the correct mounting surface for door hardware, trims, and gaskets.
• Stops air leaks and reduces cold air loss when the original panel or insulation is damaged.

• Disconnect power to the appliance before beginning any repair and remove food from door shelves as needed.
• Door removal may be required; support the door to avoid dropping or damaging hinges.
• Handle the panel carefully to avoid scratching the finish; use appropriate fasteners and torque per the manufacturer's instructions.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Replacement butter dish for refrigerator door dairy compartment. Restores secure storage when original is cracked, broken, or missing. Fits top-mount models.

Pan head screw for refrigerator assembly and panel mounting. Replace missing, stripped, or loose screws to secure components and maintain structural integrity.

Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.

Screw secures handles and components on freezers and refrigerators. Replace if stripped, broken, or missing. 10-16 x 0.500 threading fits most models.

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.