Parts for Kitchenaid KFGR383SSS0: 01 - Grille Parts

This manifold routes gas from the range's valve assembly to the individual burner tubes, ensuring steady fuel flow for reliable burner operation. Replacing a damaged manifold restores proper gas distribution and burner performance. What it does:

• Distributes gas from the main valve to each cooktop burner so burners can ignite and maintain flames
• Helps ensure even flame height and consistent heating across burners
• A worn, cracked, or obstructed manifold can cause burners to fail to light or burn unevenly
• Works with the cooktop valve assembly and burner tubes as part of the gas delivery system

• One replacement manifold

• Turn off gas supply and electrical power before starting; follow all local codes
• After installation, check all gas connections for leaks and proper burner operation
• May require removal of cooktop components or valve brackets for access

This Cover replaces a damaged or missing exterior cover to protect internal components and restore the appliance's finished appearance. It keeps wiring and small parts shielded from debris and accidental contact. What it does:

• Protects internal components and wiring from dust, debris, and accidental contact
• Restores the appliance's exterior finish and helps prevent snagging or interference
• Reduces the chance of foreign-object entry that can cause operational issues
• Common symptom: cracked, warped, or missing cover exposing internal parts

• One cover

• Disconnect power before beginning any work to avoid electric shock
• Access may require removing adjacent panels or fasteners; keep track of all screws and clips
• Handle edges carefully; use gloves to avoid cuts and protect finish

This access panel provides a removable service cover to reach internal components for maintenance or repair. It restores a clean, finished opening and helps protect wiring and controls while allowing access when needed. What it does:

• Covers and protects internal components while permitting access for service
• Keeps wiring and controls secured and out of sight
• Helps maintain the appliance's finished appearance after repairs
• Useful when replacing or inspecting internal parts that require panel removal

• Recommended for installation by a confident DIYer familiar with appliance safety
• Disconnect power (and gas if applicable) before removing or installing the panel
• Keep fasteners and any insulation or backing material that may be reused
• Inspect surrounding seals and wiring while panel is removed; do not force fit or bend panel during installation

A single replacement screw used to fasten appliance panels and components, restoring secure fit and reducing vibration or noise. Simple, low-cost part for repairs that need a missing or stripped fastener. What it does:

• Secures panels, trim, or small component housings to the appliance frame
• Helps stop rattling, vibration, and misalignment caused by loose or missing screws
• Keeps internal components properly seated to maintain normal operation
• Used wherever the OEM specifies this exact fastener

• One replacement screw

• Disconnect power before servicing the appliance to avoid shock or injury
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread by hand first, then tighten snugly—do not overtighten
• Keep small parts away from children and pets

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

• Threads onto a 1/4-20 bolt or stud to lock parts together
• Restores tight mechanical connections that reduce vibration and noise
• Helps maintain proper alignment of panels, brackets, or linkage
• Commonly replaced when the original nut is rounded, corroded, or loose

• One 1/4-20 nut

• Use the correct 1/4-20 bolt or stud size and thread engagement
• Tighten to manufacturer torque if specified; avoid over-tightening
• Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
• Turn off and unplug the appliance before performing repairs

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly. 

Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption. 

Symptoms of a bad screw include:

• The refrigerator door seems misaligned or does not close properly.
• Increased effort needed to open or close the door.
• Unusual gaps around the door seal when closed.
• The door might squeak or make other noises during operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This cover screw secures appliance panels and covers, keeping components protected and aligned. Replace missing, stripped, or corroded screws to restore a tight fit and help eliminate rattles, gaps, or panels that won't stay in place.

• Attaches an access cover or panel to the appliance frame
• Helps maintain proper alignment to protect internal components
• Replaces missing, stripped, or rusted hardware
• Typical signs: loose or rattling panel, cover won't stay secure, damaged or rounded screw head

• Disconnect power before servicing
• Support the panel while removing and installing screws to prevent misalignment
• Start threads by hand to avoid cross-threading; do not overtighten
• Use a matching driver bit to avoid damaging the screw head