Parts for Thermador H-63: 01 - Hood Parts

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

The Switch Speed Control is an OEM component specifically designed for select Bosch downdraft ventilation hoods requiring variable ventilation levels. As an adjustable regulator, it modulates blower velocities responding to modes selected by end users. 

Causes requiring replacement involve cumulative use wearing down switching components through continuous cycles. Physical impacts risk separating connections or shorting protected circuitry.

Symptoms signaling the need for a new speed control switch include: 

• Inability to adjust air exchange rates matching different cooking methods
• Erratic transitions between programmed velocities disrupting performance  
• Failure to consistently apply expected power levels to blowers

This OEM Bosch replacement component is also compatible with Thermador, Gaggenau, and some Kenmore ventilation hoods employing adjustable exhaust capacities. Correct installation restores intended variable operational control.
 

The Aluminum Grease Filter is an OEM part for Bosch range hoods. It is designed to capture and filter out grease particles from the air, preventing them from accumulating on the internal components of the range hood and ensuring efficient ventilation. This chrome-colored filter measures approximately 30 inches wide and 9.5 inches deep. 

The aluminum grease filter should be replaced when it becomes clogged, damaged, or worn out. Causes of a bad grease filter can include prolonged exposure to grease and cooking residues, improper cleaning, or physical damage such as dents or warping.

Symptoms of a bad grease filter include:

• Reduced ventilation efficiency
• Grease accumulation on kitchen surfaces
• Unpleasant odors emanating from the range hood
• Visible damage or deformation of the filter

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Aluminum Grease Filter is an OEM part for Bosch range hoods. It is designed to capture and filter out grease particles from the air, preventing them from accumulating on the internal components of the range hood and ensuring efficient ventilation. This chrome-colored filter measures approximately 30 inches wide and 9.5 inches deep. 

The aluminum grease filter should be replaced when it becomes clogged, damaged, or worn out. Causes of a bad grease filter can include prolonged exposure to grease and cooking residues, improper cleaning, or physical damage such as dents or warping.

Symptoms of a bad grease filter include:

• Reduced ventilation efficiency
• Grease accumulation on kitchen surfaces
• Unpleasant odors emanating from the range hood
• Visible damage or deformation of the filter

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This part has been discontinued by the manufacturer and is no longer available.

The Lamp Holder is an OEM part for Bosch range hoods. It secures interior lighting fixtures in place above the stovetop, managing connecting wires neatly out of the way. Proper holder positioning ensures consistent task illumination.

Causes of failure can include normal wear from sustained vibration in the kitchen environment. Periodic replacement preserves essential visibility above the cooktop.

Symptoms of a faulty lamp holder are:

• Interior hood light failing to illuminate or flickering inconsistently
• Visible damage or deterioration of mounting clips/anchors
• Loosening of lighting unit from repeated cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This stiffener reinforces the dishwasher splash/kick panel to keep it square and secure, restoring proper panel fit and reducing vibration or rattling while the machine runs. What it does

• Provides structural support for the front splash/kick panel to prevent warping or sagging
• Helps maintain proper panel alignment and gaps for a cleaner door fit
• Reduces noise caused by loose or vibrating panels during operation
• Prevents water intrusion behind the panel by keeping it firmly seated

• One splash panel stiffener

• Disconnect power to the appliance before beginning any service
• Remove the lower access panel or kickplate to reach the stiffener; retain all fasteners for reassembly
• Use the OEM hardware and torque to manufacturer guidance

This 48-inch splash panel restores the exterior finish and splash protection on compatible Bosch appliances, giving a clean, factory appearance and helping prevent water and debris from reaching internal components. What it does:

• Replaces a cracked, dented, or discolored splash panel to restore appearance
• Provides a water-resistant barrier at the appliance base to help reduce splash intrusion
• Matches factory fit and mounting points for a secure installation
• Helps maintain proper airflow path at the appliance front when installed correctly

• One 48 in. splash panel (H6548 design)

• Straightforward replacement for users comfortable removing trim and lower access panels
• Power should be disconnected before beginning work; remove any standing water and dry the area
• Keep original screws and clips unless new hardware is explicitly listed as included

This flat metal tension spring secures small panels and hardware, restoring proper fit and preventing rattles or misalignment. It's a direct-fit service part used on compatible Bosch appliances to hold components in place. What it does

• Provides tension and retention for trim, panels, or internal hardware
• Keeps parts seated and aligned to prevent gaps or rubbing
• Helps stop rattling or movement caused by worn or missing clips
• Restores secure fit where the original flat spring is damaged or lost

• Disconnect power and water before beginning any repair.
• Handle the spring carefully — edges may be sharp and the part is small.
• Note the original orientation before removal so the replacement installs the same way.
• Use basic hand tools (needle-nose pliers) and ensure the spring is fully seated and secure before restoring power.