Parts for Thermador GGCV3002: 02 - Burner Box Parts

This is a flexible replacement tubing used to route water inside compatible dishwashers, restoring proper water flow and preventing leaks or kinks. It's a direct-fit service part for specific configurations that use the LF GG30 tubing. What it does

• Channels water between internal components to enable normal fill and drain operations.
• Replaces cracked, split, or hardened tubing that cause leaks.
• Helps resolve symptoms like visible leaks, reduced water flow, or intermittent fill/drain issues.
• Maintains a sealed connection where rigid plumbing cannot be used.

• One flexible tubing piece (LF GG30) as shown.

• Install only when appliance is unplugged and water supply is turned off to avoid shock or flooding.
• Confirm routing and secure connections match original orientation to prevent kinks or interference.
• Use manufacturer-recommended clamps or fittings; replace any worn fasteners.

Ignition device creates the spark that lights gas burners on compatible Bosch gas ranges and cooktops. Replacing a worn or faulty ignition device restores reliable ignition and reduces burner-start failures. What it does:

• Generates the high-voltage spark used to ignite gas at the burner
• Replaces a unit that causes clicking without ignition or burners that won't light
• Supports reliable ignition timing for proper burner start-up
• Works as the primary spark source for the cooktop's gas ignition system

• Disconnect electrical power and shut off the gas supply before starting work
• Handle ceramic electrodes and connectors carefully to avoid damage
• Basic hand tools are typically required; wiring plugs into the existing harness

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.