Parts for Gaggenau GM215-761: 02 - Fascia Panel, Door And Spray Assemblies & Racks Parts

This plate tray is a replacement rack insert that restores safe plate storage and loading in the dishwasher rack. It keeps plates upright and separated for effective cleaning and prevents shifting during cycles. What it does:

• Provides dedicated support for plates, keeping them upright and spaced for better water flow
• Replaces cracked, broken, or missing trays that allow plates to tip or collide
• Helps reduce noise from loose dishes and prevents plate-to-plate damage
• Fits into the existing dishwasher rack to restore original plate-holding function

• Disconnect power to the appliance before servicing and remove the rack for easier access
• Install by aligning with the rack slots or clips and snapping into place; no special tools typically required
• Inspect surrounding rack components for damage and replace if worn to ensure proper fit

This lower rack assembly replaces a worn or damaged lower dishwasher rack to restore stable support for dishes and cookware. It provides smooth rolling and secure placement to help the dishwasher hold and clean lower-basket items reliably. What it does:

• Supports plates, pots and larger items on the dishwasher's lower level
• Restores proper wheel alignment and smooth in-and-out movement
• Helps prevent tipping or shifting of dishes during wash cycles
• Works with the lower basket area to keep items positioned for effective cleaning

• Disconnect power and water supply before starting any repair
• Inspect existing mounting clips/wheels and transfer any reusable hardware
• Handle rack edges and rollers carefully to avoid damage to rack coating

This replacement filter handle lets you grip and remove the appliance's filter assembly for cleaning or replacement, restoring safe access and easier maintenance. It installs without changing the filter itself. What it does:

• Provides a secure grip to turn, pull, or lift the filter for removal
• Holds the filter assembly in place so the seal engages correctly
• Makes routine cleaning and filter swaps easier and safer
• Commonly replaced when cracked, broken, or difficult to grip

• Disconnect power and shut off water before servicing
• Typically installs by snapping or sliding into the filter housing; mild hand force or a screwdriver may be needed
• Inspect mating surfaces for debris or damage before installing
• If the filter still won't release, stop and consult the appliance diagram.

This is a replacement sump mounting screw that secures the dishwasher sump/pump assembly, helping maintain a sealed, stable drain and pump connection. Use it when the original screw is missing, stripped, or corroded. What it does:

• Fastens the sump/pump housing to the dishwasher base to keep the pump assembly aligned and secure.
• Helps maintain the seal at the sump area when used with the correct O-ring (replace O-ring if damaged).
• Prevents leaks and vibration caused by loose or damaged sump fasteners.
• Restores proper mechanical connection after service or part replacement.

• One sump mounting screw

• Replace only with the exact OEM screw.
• Turn off power and water to the appliance before accessing the sump/pump area.
• Inspect the sump O-ring (referenced O-ring part) and replace if worn to ensure a proper seal.
• Use appropriate tools and hand-tighten to OEM torque recommendations; avoid over-tightening to prevent damage.

This rubber sump gasket seals the dishwasher sump to stop leaks and keep water contained in the drain/motor area. It restores a watertight seal to prevent water pooling and protect the motor assembly. What it does:

• Forms a seal between the sump and adjacent housing to prevent water leaks
• Helps stop water from pooling under the appliance or running into the cabinet
• Protects the motor and electrical components from moisture damage
• Can reduce unusual dripping or intermittent leaks from the dishwasher base

• Disconnect power and water supply before starting any repair
• Remove access panels and drain components to reach the sump area
• Inspect mating surfaces for residue or damage and clean before seating the gasket
• Seat the gasket evenly; reassemble panels and run a short test cycle to confirm there are no leaks

A replacement black push button for appliance control panels that restores a missing, worn or damaged selector button for reliable tactile feedback and a finished appearance. Fits compatible Bosch control panels that use this snap-in style button. What it does

• Acts as the user interface button on the appliance control panel for selecting cycles or options.
• Replaces cracked, broken or faded buttons that no longer depress or register reliably.
• Restores proper button travel and appearance to help prevent accidental presses and improve usability.
• Works with the factory retaining clip or snap-fit mounting used on the original control panel.

• One black push button.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Removal of the control panel or overlay may be required to access the button; use non-marring tools to avoid damage.
• The button typically snaps or clips into the control panel—align carefully and press until it seats; do not force excessive pressure.

This black telescoping strip is a decorative and adjustable trim piece that helps align and finish appliance panels for a clean look. It restores proper fit where a retractable or extension trim is used. What it does:

• Covers and finishes the edge of a movable panel or trim for a neat appearance
• Adjusts length to bridge gaps between panels or accommodate alignment differences
• Helps reduce rattling or movement by holding trim edges in place
• Restores worn or missing trim that makes the appliance look incomplete

• One black telescoping strip

• High-level replacement; remove the affected panel or trim per your appliance service instructions
• Handle clips and mounting tabs carefully to avoid breakage
• Wear gloves to protect hands and avoid scratching finished surfaces
• Disconnect power to the appliance before servicing any internal panels

This hinge guide is the door support piece that helps keep the appliance door aligned and moving smoothly. Replacing a worn guide restores proper door tracking and reduces binding or uneven closing. What it does:

• Guides and supports the door hinge to maintain correct alignment during opening and closing
• Prevents door binding, rubbing, or catching on the cabinet or frame
• Helps reduce uneven wear on hinge components and preserves smooth operation
• Works as a direct-fit replacement when the original guide is cracked, broken, or worn

• One hinge guide as shown

• Turn off power and follow appliance-specific safety procedures before servicing
• Inspect surrounding hinge hardware and mounting points; replace damaged fasteners if needed
• Typically installs with basic hand tools; do not force parts—ensure proper seating before reassembly

This hinge guide is the door support piece that helps keep the appliance door aligned and moving smoothly. Replacing a worn guide restores proper door tracking and reduces binding or uneven closing. What it does:

• Guides and supports the door hinge to maintain correct alignment during opening and closing
• Prevents door binding, rubbing, or catching on the cabinet or frame
• Helps reduce uneven wear on hinge components and preserves smooth operation
• Works as a direct-fit replacement when the original guide is cracked, broken, or worn

• One hinge guide as shown

• Turn off power and follow appliance-specific safety procedures before servicing
• Inspect surrounding hinge hardware and mounting points; replace damaged fasteners if needed
• Typically installs with basic hand tools; do not force parts—ensure proper seating before reassembly

This hinge guide is the door support piece that helps keep the appliance door aligned and moving smoothly. Replacing a worn guide restores proper door tracking and reduces binding or uneven closing. What it does:

• Guides and supports the door hinge to maintain correct alignment during opening and closing
• Prevents door binding, rubbing, or catching on the cabinet or frame
• Helps reduce uneven wear on hinge components and preserves smooth operation
• Works as a direct-fit replacement when the original guide is cracked, broken, or worn

• One hinge guide as shown

• Turn off power and follow appliance-specific safety procedures before servicing
• Inspect surrounding hinge hardware and mounting points; replace damaged fasteners if needed
• Typically installs with basic hand tools; do not force parts—ensure proper seating before reassembly

This hinge guide is the door support piece that helps keep the appliance door aligned and moving smoothly. Replacing a worn guide restores proper door tracking and reduces binding or uneven closing. What it does:

• Guides and supports the door hinge to maintain correct alignment during opening and closing
• Prevents door binding, rubbing, or catching on the cabinet or frame
• Helps reduce uneven wear on hinge components and preserves smooth operation
• Works as a direct-fit replacement when the original guide is cracked, broken, or worn

• One hinge guide as shown

• Turn off power and follow appliance-specific safety procedures before servicing
• Inspect surrounding hinge hardware and mounting points; replace damaged fasteners if needed
• Typically installs with basic hand tools; do not force parts—ensure proper seating before reassembly

This rubber spacer cushions and spaces components to reduce vibration and prevent metal-to-metal contact, helping cut noise and wear in the appliance. Simple, small replacement to restore proper fit and dampening. What it does:

• Acts as a vibration damper and protective bumper between parts
• Prevents rubbing, rattling, and abrasion on panels or assemblies
• Helps maintain correct spacing and alignment of adjacent components
• Common symptom links: rattling, vibration, intermittent noise, or loose-feeling parts

• Disconnect power and water before servicing
• Access may require removing a panel or trim—keep track of fasteners
• Replace like-for-like; ensure the spacer seats fully in its mounting location