Parts for Thermador SGT3002: 02 - Gas Valves Parts

Gas burners won't ignite or spark continuously? This spark module generates the high-voltage spark needed to light burners. DIY repair in 30-60 minutes.

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

Fix burner ignition issues or gas flow problems with this cooktop natural gas valve and screw kit. Compatible with multiple cooktop models.

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

Fix burner ignition issues or gas flow problems with this cooktop natural gas valve and screw kit. Compatible with multiple cooktop models.

Fix cooktop burner connection issues with this terminal block connector. Restores electrical contact to heating elements. Standard difficulty repair.

Aluminum pop rivet for range hoods. Secures panels and components in place. Replace if missing, damaged, or loose to restore proper assembly and fit.

Replace a cooktop burner jet bypass and o-ring if flames are uneven, yellow, or won't ignite properly. Fits gas cooktops and ranges. Moderate DIY repair.

Fix uneven flames or poor burner performance with this burner bypass jet. Controls gas flow to ensure proper heating. Moderate DIY repair for cooktops.

Fixes uneven flames or weak burner output on LP gas cooktops. This bypass jet ensures proper gas flow for consistent cooking performance. Direct fit.

Fix uneven cooktop flames or low heat output with this burner jet bypass. Controls LP gas flow for proper flame regulation. Moderate DIY repair.

Gas valve gasket for cooktops. Replace if you notice gas odors, uneven flames, or poor burner performance. Verify fit with your model number.

This is a replacement mounting screw designed to secure appliance panels and internal components, restoring proper fit and reducing vibration or rattling. Use to replace missing or damaged fasteners for a secure repair. What it does:

• Secures panels, brackets, or internal assemblies to prevent movement
• Restores proper alignment and reduces vibration or noise from loose parts
• Helps maintain electrical and mechanical connections by holding components in place
• Common symptom: loose or missing screw causing rattling, misaligned panels, or parts that shift during operation

• Screw as shown

• Disconnect power to the appliance before handling internal parts
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to mounting surfaces
• Keep small parts away from children and dispose of damaged fasteners

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.

This is a replacement spark module wire used to connect a gas appliance's spark module to an electrode, restoring reliable ignition and consistent spark delivery. Designed as a direct-fit service part where listed. What it does:

• Transfers high-voltage spark from the ignition module to the burner electrode for reliable ignition.
• Replaces cracked, frayed or damaged wiring that causes weak or no spark at the burner.
• Helps resolve intermittent ignition, click-no-light, or spark-arc issues when the module and electrode are functioning.
• Maintains proper routing and insulation to prevent shorting or arcing to adjacent metal parts.

• Always disconnect power and, for gas appliances, shut off the gas supply before starting work.
• Handle the high-voltage wire by the insulated boot; avoid pulling on the conductor or bending the terminal excessively.
• Verify correct wire routing and secure connections to prevent contact with sharp edges or hot components.