Parts for Ge ZIS360NRI: 08 - Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This snack pan assembly replaces the factory snack pan to restore shelf storage and organization in the refrigerator. It provides a stable tray for small items and helps keep foods separated and accessible. What it does:

• Replaces a cracked, warped or missing snack pan to restore usable shelf space
• Supports lightweight food items, snack packs and deli containers
• Helps prevent spills from spreading to lower shelves
• Fits into the refrigerator snack/pantry area to maintain orderly storage

• Install by sliding the pan into the existing refrigerator rail slots until seated
• No special tools required for most installs; handle carefully to avoid chipping or cracking the plastic during installation
• Disconnect power only if service requires removing interior panels near electrical components

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.

This front basket is the freezer door bin that holds and organizes frozen items on the door. It restores storage space and helps prevent items from shifting or falling when the door opens. What it does:

• Provides a secure shelf on the freezer door for packaged foods and small containers
• Keeps frozen items organized and easily accessible
• Prevents items from falling out when opening or closing the freezer door
• Replaces cracked, broken, or missing door bins that no longer hold items

• One front basket assembly

• Disconnect power to the appliance before attempting service
• Remove all items from the door and lift or unclip the old bin per the appliance guide
• Inspect mounting rails or supports for damage and replace if necessary
• Handle plastic components carefully to avoid cracking during installation

This wire support holds the refrigerator veg/crisper pan in place so drawers stay level and slide smoothly. It replaces a bent, broken or missing support to restore proper pan alignment and storage stability. What it does

• Provides a stable mount for the veg/crisper pan so drawers sit and slide correctly
• Prevents the pan from sagging or tilting under load
• Helps stop binding or rubbing that can occur when a support is damaged
• Commonly replaced when the support is bent, cracked or missing

• One veg/crisper pan wire support

• High-level replacement: remove the drawer and lift the pan to access the support; reinstall in the same location
• Use gentle pressure to seat the support into its mounts; do not force or bend the part
• Unplug the appliance or disconnect power at the breaker before working near electrical components
• Wear gloves to protect hands from sharp sheet-metal edges

This drawer slide assembly supports and guides your refrigerator's drawer so it opens and closes smoothly. Replace a cracked or worn slide to restore proper alignment and stop sticking, dragging, or dropped drawers.

• Supports the drawer and provides smooth sliding action
• Maintains alignment to prevent binding or popping off the track
• Replaces cracked, warped, or seized slide components
• Typical symptoms: drawer hard to open/close, crooked, or falls off

• Disconnect power before servicing
• Empty and remove the affected drawer and any obstructing shelves for access
• Remove fasteners securing the old slide; transfer any reusable brackets/clips from the original if applicable
• Align and secure the new slide, then verify the drawer engages both tracks and glides freely

This showcase pan shelf front is the front trim piece for the refrigerator showcase pan shelf, restoring the shelf's front edge and helping keep stored items contained. It replaces a cracked, broken, or missing front piece to improve shelf function and appearance. What it does

• Replaces a damaged or missing front trim on the showcase/pan shelf
• Helps keep small items from sliding off the shelf and contains minor spills
• Restores proper alignment and support at the shelf front
• Commonly needed when the front is cracked, broken tabs prevent secure attachment, or items fall off the shelf

• One showcase pan shelf front (single front piece only)

• Remove the shelf or pan as needed to access the front; align tabs with the shelf openings and press until the front snaps into place
• If the unit uses fasteners, use the correct screwdriver and tighten until snug—do not overtighten
• Handle plastic parts carefully to avoid cracking; replace if mounting tabs are worn or missing

The showcase pivot provides the pivot point that supports the washer's showcase assembly, restoring proper alignment and stable rotation for smoother operation and reduced noise or wobble. What it does:

• Serves as the pivot/support for the washer showcase assembly so the basket or door rotates as designed
• Keeps the showcase aligned to prevent rubbing, binding or uneven movement
• Helps reduce vibration and noise caused by a worn or damaged pivot
• Worn pivots can cause visible misalignment, wobbling or unusual noises during spin cycles

• Disconnect power and water supply before beginning any repair
• Remove access panels and note orientation of the old pivot before removing
• Inspect surrounding parts and replace if damaged
• Reassemble securely; run a short test cycle to verify alignment and operation

This small replacement button glide restores smooth, reliable button movement on the appliance control panel, helping buttons press and release correctly for consistent operation. What it does:

• Provides a low-friction surface for control panel buttons to slide on
• Helps prevent buttons from sticking, binding, or feeling uneven
• Restores proper seating and tactile feedback for worn or damaged buttons
• Useful when buttons wobble, catch, or fail to make consistent contact

• Disconnect power (unplug or shut off circuit breaker) before servicing the control panel
• Typically accessible from the front control bezel; remove trim or key assembly as needed
• Handle small plastic parts carefully to avoid breaking tabs; reassemble trim in original order