Parts for Thermador GSC30CVWC-01: 13 - Door Assembly Parts

This replacement window frame secures and finishes the door glass, restoring the appliance door's fit and appearance. It keeps the glass held in place and helps maintain a proper seal and smooth operation. What it does:

• Holds and supports the inner/outer door glass panel
• Restores proper alignment and fit of the door assembly
• Helps prevent drafts, splashes, and visible gaps around the door glass
• Commonly replaced when cracked, warped, or cosmetically damaged

• One window frame

• Disconnect power and water before starting repairs
• Handle glass and frame edges carefully; wear cut-resistant gloves and eye protection
• Some door disassembly may be required; follow the OEM service instructions for your model

Replaces the interior glass pane in your oven door assembly. Needed when the original inner glass is cracked, shattered, or broken. Restores visibility.

Replaces the interior glass pane in your oven door assembly. Needed when the original inner glass is cracked, shattered, or broken. Restores visibility.

Replaces the interior glass pane in your oven door assembly. Needed when the original inner glass is cracked, shattered, or broken. Restores visibility.

Replaces the interior glass pane in your oven door assembly. Needed when the original inner glass is cracked, shattered, or broken. Restores visibility.

Secures oven door glass and keeps the inner panel aligned. Replace if your bracket is cracked, broken, or missing to restore proper glass support.

A flanged gray bushing that cushions and supports the appliance door glass, helping reduce noise and wear where the glass meets the door frame. Replaces a worn or damaged bushing to restore proper fit and quiet operation. What it does:

• Positions and stabilizes the door glass at the flange to prevent rubbing and vibration
• Cushions the glass to reduce rattling and chatter during operation
• Helps maintain correct spacing to avoid glass contact with metal edges
• Small part failure can allow the glass to shift, vibrate, or produce noise

• One flanged gray door glass bushing

• Disconnect power (unplug or switch off circuit breaker) before beginning any service
• Handle door glass carefully; support it to prevent breakage when removing/installing the bushing
• Replacement typically requires partial door disassembly—follow OEM instructions
• Inspect adjacent clips, seals, and mounting surfaces for wear and replace as needed

This part has been discontinued by the manufacturer and is no longer available.

This left-side, clear handle end cap restores the finished look and secure fit of a dishwasher or appliance handle. It replaces a cracked or missing end cap to keep the handle aligned and prevent snagging. What it does:

• Covers and protects the handle's exposed end, restoring appearance
• Holds the handle trim in place to maintain proper alignment
• Prevents sharp edges or gaps that can catch clothing or fingers
• Matches the original clear finish for a near-invisible repair

• Basic snap-on or screw-retained installation; verify hardware and orientation before fastening
• Power off and open the appliance door fully to access the handle area if needed
• Handle and surrounding trim may need gentle removal to fit the end cap; use non-marring tools

This right-side clear handle end cap replaces a cracked, broken or missing trim piece to restore the refrigerator door's finished look and help keep the handle secure. It matches the original shape and finish for a clean appearance. What it does:

• Covers and protects the outer end of the door handle for a finished look
• Helps hold the handle hardware in place and prevents exposed fasteners
• Replaces damaged or missing trim that can snag or look worn
• Restores OEM appearance when the original end cap is cracked, faded or broken

• Typically snaps or screws into the handle; remove the handle per your model's instructions before replacing
• Use caution with trim clips and small fasteners to avoid breakage
• Clean mating surfaces before installation for best fit

This lock washer secures fasteners by biting into the mating surface to resist loosening from vibration and thermal cycling. It's a small but critical retaining part used on appliance assemblies where a secure, vibration-resistant connection is required. What it does

• Provides a spring clamp action that helps keep bolts and screws from backing out under vibration
• Maintains tension on threaded connections during thermal expansion and contraction
• Commonly used on motor mounts, pump assemblies, and panels that experience movement
• Can reduce intermittent electrical/grounding issues caused by loose hardware

• One lock washer

• Inspect threads and mating surfaces; replace any damaged fasteners before installing the washer
• Install with the correct-sized bolt or screw; washer must fit snugly to function properly
• Tighten to manufacturer torque specifications when available; avoid over-tightening
• Disconnect power and follow all safety precautions before servicing the appliance

Secures the glass cooktop to the range frame. Replace if clip is cracked, broken, or missing to properly hold the cooktop surface in place during use.

Panel mounting screw for cooktop installation. Secures control panels and housing components. Replace if missing, stripped, or damaged during repair.

Oven door won't close or stay shut? This door strike latch engages the catch to keep your oven door secure. Simple fix for worn latches.

Replacement mounting screw for cooktop panels and brackets. Secures loose components, restores proper fit, and prevents rattling. Direct fit fastener.

This 65-inch door gasket seals your range door to maintain proper temperature and prevent heat loss. Replace when worn, torn, or no longer sealing tightly.

This 65-inch door gasket seals your range door to maintain proper temperature and prevent heat loss. Replace when worn, torn, or no longer sealing tightly.