Parts for Mtd 1X65CU: 1X65cu Crankshaft & Crankcase Cover Parts

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.

This genuine MTD crankshaft assembly comes with the connecting rods that attach the crankshaft to the pistons, which function within the cylinder. The function of a crankshaft assembly in a log splitter or a chipper shredder is to keep the engine running through the generation of rotational energy.The crankshaft assembly might have to be ordered as a complete replacement if there is damage to the crankshaft that also affects the fastening parts that attach the crankshaft to the engine. If the damage cannot be attributed to a smaller part within the small engine, the crankshaft kit should be ordered to replace the broken components immediately. The log splitter or chipper shredder cannot be used until the broken or damaged parts have been removed and replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This crankshaft assembly is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This brake assembly bolt is a genuine MTD part that is manufactured to be a replacement part for lawn tractors, push walk-behind mowers, log splitters, trimmers, chippers, shredders, and other engines.On engines such as these, the brake assembly helps work the brake, which stops the engine and any forward motion. It is not abnormal for brake assembly bolts to become worn over time and need to be replaced. This brake assembly bolt is designed for use with machines made by Black Max, Craftsman, Columbia, Cub Cadet, Huskee, Husky, Mastercut, MTD, Remington, Yard Machines, and Yard-Man. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This genuine MTD oil dipstick measures the amount of oil in in a small engine as a means of assessing whether the engine is low on oil. If the oil dipstick shows on its measurement lines that the oil level is low, the engine should be refilled with oil.If the ring that holds the dipstick in place pops off or snaps, a replacement oil dipstick should be purchased. Additionally, if the engine oil has recently been refilled and the dipstick does not reflect the refill and still indicates that the engine is low on oil, the dipstick should be removed and replaced with this genuine OEM oil dipstick part.This oil dipstick is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

This dipstick oil fill o-tube ring is a genuine MTD part. It is manufactured as a replacement part for various push walk-behind mowers, self-propelled walk-behind mowers, tillers, snowblowers, leaf blowers, log splitters, wood chippers, and other small engines.This part is used to check the level of oil in these machines. Dipstick o-rings especially may become too dirty or damaged to be useful anymore. They may also become lost or damaged. Being able to check the oil is an important maintenance step, so this part must be replaced if necessary. This is a genuine OEM part sourced directly from the manufacturer and sold individually. It is compatible with machines made by many brands, including Huskee, Husky, Yard Machines, MTD, Remington, Yard-Man, Cub Cadet, Craftsman, and MasterCut.

This genuine MTD oil filler tube can be used as a replacement part for a chipper shredder or a log splitter. The function of an oil filler tube is to control and expedite the process of filling an engine with engine oil. An oil filler tube can allow for the oil filling to be performed at a different part of the engine, meaning the oil cap can be placed within easier reach.An oil filler tube can be subject to damage in the form of piercing, puncturing, or erosion to the material such that the oil leaks out of it on its way to filling the engine. An oil filler tube is an external part, so it can also be lost or misplaced. If this is the case, the oil filler tube should not be used to pour engine oil until this genuine OEM replacement oil filler tube has been ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This oil filler tube is compatible with MTD brand chipper shredders, leaf blowers, and leaf vacuums. This part is sold individually.

This part is a replacement oil seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or defective oil seal in outdoor power equipment. The oil seal helps to prevent oil from leaking from the engine sump. If the user notices an oil leak, this seal may need to be replaced. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this oil seal, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this oil seal is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This part is a crankcase cover. The crankcase itself is what shields the crankshaft from any dirt or debris that would damage the engine. The crankcase is a pressurization chamber for the fuel-air mixture. This part is a cover for the crankcase. It's important that this shield is intact because any dirt or debris that gets into the engine can cause the engine to fail.A new crankcase cover may be needed if the crankcase cover is dented, broken, or damaged in any way. A visual inspection is sufficient. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover is compatible with engines, lawnmowers, tillers, log splitters, chippers, shredders, and trimmers manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

This crankcase gasket is a genuine MTD part, sold individually. This crankcase gasket can be used as a replacement part in lawnmowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the crankcase gasket for one of these outdoor appliances is to seal off and protect the area surrounding the crankcase gasket from leakages and the accumulation of external materials within the infrastructure of the crankcase.The crankcase gasket might have to be replaced if the seal is broken due to damage or stripping away of the gasket. This could occur as a result of general wear and tear from long-term use or due to collision with a hard object that warps the gasket beyond functionality. If this occurs, the crankcase gasket should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This crankcase gasket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, Huskee, and MasterCut.