Parts for Mtd 1X65CU: 1X65cu Flywheel & Shroud Parts

This is a starter recoil assembly. It is used when starting small lawn equipment and other machines. It engages the flywheel. With time and use, any or all of the recoil can wear out or become damaged, including the spring, housing, rope, or pulley. If something is damaged or worn out, the entire starter recoil assembly must be replaced. Signs that the part requires a repair include an engine that won't start or has difficulty engaging.Replacing a starter recoil assembly is easy and can be done in about 15 minutes. A nut driver and screwdriver are required for the repair. Wear gloves. Make sure the equipment is completely cooled before beginning the recoil assembly replacement. After putting tension on the spring and pulley, hold the housing securely to prevent it from releasing.The starter recoil assembly is a genuine OEM-authorized replacement part. It is sold individually. The starter recoil assembly is compatible with MTD, Cub Cadet, Yard Machines, Husky, Yard-Man, and Troy-Bilt brands. It is a complete part that includes the housing, rope, pulley, and recoil spring. It works with small engines, lawnmowers, log splitters, trimmers, and other similar equipment.

This part is a replacement nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, misplaced, or stripped nut in a variety of lawnmower and lawn tractor models.Nuts are a standard piece of hardware and are usually used in conjunction with a mating bolt. Nuts enable parts of the equipment to be properly and securely fastened together. Nuts can easily become corroded, stripped, rusty, misplaced, or otherwise broken, thus requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this nut, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this nut is suitable for use on several different models of lawnmowers and lawn tractors manufactured by MTD, Craftsman, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

A starter handle is a piece that works in combination with several other components to start the engine in numerous machines, including lawn equipment. It works when the user pulls the starter handle grip, attached by a mechanism to the crankshaft. It turns to start the engine. If the starter handle breaks, it will have to be replaced in order to start the machine. Starter handles can become damaged from normal use, misuse, or after an accident.Replacing the starter handle is a simple project. After locating the mechanism it attaches to, typically a sturdy rope or cord, the starter handle should be tied securely to the end of the string. Wear gloves to protect the hands during the process. Test the strength of the attachment before trying to start the machine.This starter handle is a genuine OEM replacement part. It is sold as an individual piece. This starter handle is made of durable, high-quality material. It can be used in devices from MTD, Husky, Troy-Bilt, Yard Machines, and Yard-Man. It is compatible with various lawnmowers, log splitters, trimmers, and other devices with pull start engines.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This part can be used to replace a worn or broken rear stud to securely attach the shroud and keep it in place.Engine shrouds are critical for ensuring that air is properly circulated around the engine to keep it cool. Without an engine shroud overheating can occur quickly and cause serious engine damage. This rear stud is intended to attach the back of the engine shroud and secure it in place. This starter/shroud rear stud is a genuine replacement part that has been sourced directly from the manufacturer. This replacement starter/shroud rear stud fits various different models of MTD, Cub Cadet, Husky,Troy-Bilt, and Yardman outdoor power equipment such as lawnmowers, log splitters, and trimmers. Please note this starter/shroud rear stud is sold individually.

This part can be used to replace a worn or broken front stud to securely attach the shroud and keep it in place.Engine shrouds are critical for ensuring that air is properly circulated around the engine to keep it cool. Without an engine shroud, overheating can occur quickly and cause serious engine damage. This front stud is intended to attach the front of the engine shroud to secure it in place. This starter/shroud front stud is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement starter/shroud front stud fits various different models of MTD, Cub Cadet, Husky, Troy-Bilt, and Yardman outdoor power equipment such as lawnmowers, log splitters, and trimmers. Please note this starter/shroud front stud is sold individually.

This part can be used to replace a deteriorating or broken engine shroud on many different models of lawnmowers, log splitters, and trimmers. It is made of high-quality, durable materials that are made to last.An engine shroud is critical for preventing engine overheating. Engine shrouds are essential for ensuring that air is properly circulated around the engine to keep it cool. Without an engine shroud overheating can occur quickly and cause serious engine damage. This engine shroud is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement engine shroud fits various different models of MTD, Cub Cadet, Craftsman, and Yardman outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this engine shroud is sold individually.

This part is a replacement shroud spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken shroud spacer in outdoor power equipment. Spacers ensure that equipment doesn't overheat or vibrate excessively by preventing too much friction from forming between moving components. They are essential to safe and proper functionality and should be replaced when no longer effective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this shroud spacer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this shroud spacer is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a nut. This is a genuine replacement part made by MTD. Nuts are small but typically an important part of many different machines. These parts allow for pieces of the machine to stay secure and in place during use. Nuts usually work with other small parts such as screws and washers to ensure the proper functioning of the machine.A new nut might be needed if the current one is visibly missing or damaged. These parts can become worn down over time due to normal wear and tear. If this is the case it is recommended that it be replaced as soon as possible. This repair should be fairly easy and only require common household tools. Be sure the engine is completely cooled down before attempting to replace this part.This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This is a quality replacement flywheel used in lawn and garden tools like tillers and wood chippers. The flywheel is a substantial metal wheel that is attached to the rotated shaft. The part regulates how much power is moved from the motor to the other parts of the equipment. The inertia and weight of the flywheel moderates and opposes small changes to the speed of the engine. The flywheel holds that energy in reserve until it is most needed by the machine.Over time with ordinary use, the flywheel may become cracked. One way to tell if the part is damaged is if gear slippage occurs. The location of the part and replacement process will depend upon the machine in which it is used. It should require only a screwdriver to place the new replacement component.This flywheel is compatible with tillers, log splitters, and wood chippers manufactured by MTD and Cub Cadet. It is sold as an individual part. The flywheel is a genuine OEM replacement part sourced directly from the manufacturer.