Parts for Yard Machines 31AH64EG700 / 2015: Suc Fuel Tank & Mounting Parts

Replacement fuel cap for snowblowers. Secures fuel tank opening and prevents spills during operation. Order if your original cap is cracked or missing.

Fuel tank nipple connects fuel lines to the tank on small engines. Replace if cracked, leaking, or worn to restore proper fuel line connections.

Replacement fuel tank for snow throwers and gas snowblowers. Holds gasoline for engine operation. Replace if cracked, leaking, or damaged.

Replace this snowblower bearing bushing when you notice excessive wobble or noise from the auger. Ensures smooth rotation and prevents damage. Confirm fit with your model number before ordering.

Secures hoses to the carburetor on outdoor power equipment engines. Replace if clamp is rusted, broken, or missing to prevent fuel or air leaks.

This is a genuine OEM replacement governor arm sourced directly from the manufacturer for use on various snowblower and snow thrower engines. It is part of the mechanical governor system that controls the carburetor throttle to maintain steady speed regardless of how much stress the engine is under. The governor arm is located on the governor cross shaft. One end is connected to the governor spring and the other is connected to the throttle linkage. The governor arm is pushed in one direction and pulled in another to increase and decrease the throttle speed. If the throttle will not rev or gets stuck in one position, the throttle arm may be the cause. This part could be damaged in impact, for example of the blower is dropped or tips over. If this occurs, the throttle arm will need replaced.Remove the spark plug and drain the fuel before working on the governor. Remove the governor spring and detach the governor arm from the linkage. Install the new governor arm and reattach the spring. Replace the blower parts. Fuel the blower and test. Adjust the governor as needed.The governor arm is a metal part that is sold as an individual unit. It is compatible with snow blowers and snow throwers manufactured by MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

Hex nut fastener for lawn and garden equipment engines. Secures components and covers. Replace if stripped, rusted, or missing for proper assembly.

M6 x 21mm governor bolt for outdoor power equipment engines. Replace if bolt is stripped, missing, or damaged during governor maintenance or repair.

This is a genuine OEM replacement governor arm sourced directly from the manufacturer for use on various snowblower and snow thrower engines. It is part of the mechanical governor system that controls the carburetor throttle to maintain steady speed regardless of how much stress the engine is under. The governor arm is located on the governor cross shaft. One end is connected to the governor spring and the other is connected to the throttle linkage. The governor arm is pushed in one direction and pulled in another to increase and decrease the throttle speed. If the throttle will not rev or gets stuck in one position, the throttle arm may be the cause. This part could be damaged in impact, for example of the blower is dropped or tips over. If this occurs, the throttle arm will need replaced.Remove the spark plug and drain the fuel before working on the governor. Remove the governor spring and detach the governor arm from the linkage. Install the new governor arm and reattach the spring. Replace the blower parts. Fuel the blower and test. Adjust the governor as needed.The governor arm is a metal part that is sold as an individual unit. It is compatible with snow blowers and snow throwers manufactured by MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

Governor spring for snow throwers and small engines. Installs on the governor linkage to control engine speed. Replace if stretched, broken, or missing.

Throttle return spring installs on snow thrower engine to control throttle opening and closing. Replace if stretched, broken, or missing from linkage.