Joe for Model Number SHU9915uc/11 I just received a replacement door switch assembly part number AP3194809 and tried installing it. When i removed the individual wires from the old switch i had some trouble and lost track of what wire went where. There are 3 individual wires. The wire for the middle pole is obvious because it has a plastic cap on it. That leaves me with a double red and white wire and a single purple wire. The end clips on both are the same and i am not sure which one goes where. Of the 2 remaining poles on the switch one is much longer and enters on the side of the switch.
Answer Joe, Based on the information we have : the double white with red stripe wires should attach to the silver latch terminal ( the long one that enters the side of the switch. The purple wire should attach to the other "outside" terminal, and the remaining wire attaches to the middle terminal. And here's a way to verify the switch is wired correctly "With door open, turn on dishwasher –keep door open. If display doesn’t turn on, immediately turn off dishwasher and reverse door latch terminal." Good Luck and Thanks Read More... Answered by AppliancePartsPros.com | Monday, June 4, 2012