Joe for Model Number FDB1500LFC0 When I press any of the cycle buttons,example "Normal Wash", and then hit the "Start" button, all that happens is that the lights just blink (Normal Wash, heat dry and washing). If I hit the start/cancel button again the lights go out. The lights do not blink all the time, just when I hit the start button. I did not give an accurate description of the problem in my previous question. Do you recommend replacing the control board?
Answer Hello Joe. You will still need to check the door latch assembly A00099902 first. If any of the switches are bad, you will need to test and replace the door switch assembly if it is bad. It will cause the unit to operate like you are describing as well. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, April 5, 2012