Zac for Model Number ATF7000ES1 My washer will start to drain for final spin, take a little water out and then flash No Spin and turn off. Pressing any button after that will cause ERR to flash on panel. It will go through the wash cycle, but not sure where it quits, on first draining or just on spin. I've taken the front off to clean the filter but found little in the filter to cause a problem. I found the service manual under the top panel and followed the instructions to get an error code - E45. This indicates control panel. Is this what I need then? The machine is getting old, the control panel housing is all cracked and the big gasket needs replacing too. Is it worth it to fix? I guess I have to decide that. It worked fine yesterday, and we've had no power surges or anything to fry the panel. I'm going to try putting it back together and give it another try, sometimes just taking it apart and putting it back together fixes things, like a loose connection or bad contact. Maybe I'll unplug and replug all the connectors, spray with some Deoxit. That always works with my tube amp, it is never actually the tubes, just the socket.
Answer Zac, the error E45 would mean that the main control 137007000NH would need to be replaced as it is a direct failure of a component in the control. Read More... Answered by AppliancePartsPros.com | Friday, May 8, 2020