Customer Questions and Answers for Electronic Control by Frigidaire

HK, First thing is check or replace the door switch 297243800 and check for loose connections, check the wiring harness at the freezer door hinge and make sure the door closes and seals along the bottom of the door and activates the switch. If the problem persists replace the control board 297235200. The control board is relatively easy " To remove the Precision Set control assembly: 1. Disconnect power to freezer. 2. Using a small flat bladed screwdriver or equivalent tool, carefully pry under the bezel until the retaining latches release from the door assembly. Pull control assembly straight out to avoid damaging the electrical connection wire prongs. To install the Precision Set control assembly: 1. Push control in gently with the palm of your hand. You may need to slightly adjust the bezel position up or down to align connector pins. 2. Gently push control flush to door with palm of hand."