Jen Model# Fdb2410lds0 for Model Number fdb2410lds0 My dishwasher isn't draining. I have run all of the checks, hose is clear, strainer and parts below the arm have been cleaned including taking out the 3 screws and making sure the little wheel would spin, did a bench test on the motor and it ran. I do not know how to check the vanes on the impeller inside the drain pump as was suggested to Jack above, but since it ran for the bench test does that mean it's good? Is there something that I can't see between the motor and the other stuff I disassembled that could be wrong? Thanks
Answer Jen, If the drain pump motor runs 154580301 ,then the dishwasher should drain, especially if you've already checked and cleaned all the filters and traps. Unless the vanes on the impeller are damaged and not moving the water, if the check valve flapper( in the outlet of the drain pump is stuck closed or damaged) or there is a restriction/clog in the drain hose from the pump to the drain at the sink. Good Luck and Thanks Read More... Answered by AppliancePartsPros.com | Monday, April 9, 2012