Customer Questions and Answers for Washer Drive Motor by Frigidaire

Sam, 1. Find out if unit was overloaded.If not, remove belt from the motor and spin the motor pulley. Does the motor spin free? no then replace the motor. 3. Disconnect plug from the motor and measure resistance of the windings (pin 1 to pin 2,pin 1 to pin 3, pin 2 to pin 3).All readings should be between 3 and 6 Ohms. If readings are correct,check wiring from motor to motor control board,If good, replace motor control board.If the readings are incorrect, replace motor.