Lawrence February 18, 2020 for Model Number EIFLS55IRR0 My machine spins but when the wash is complete the clothing is still soaked
1 Answer Hello Lawrence, first run the Test mode to find if any Fault codes are in the control board's memory, to start that test push any keypad once to wake the control then press Cancel and Start pads together for 6 seconds , E00 is no fault codes and washer will briefly start then stop. Read More...
Ron June 23, 2019 for Model Number Electrolux Motor Part Number: AP4368585 What is the warranty on the motor?
1 Answer Ron, Here is a link to our return policy. https://www.appliancepartspros.com/customerservice/returns.aspx Read More...
Sam October 12, 2018 for Model Number EWFLS70JIW0 Hi, I am periodically getting the E58 code on my Electrolux front loader washing machine. I think this means that I need a new motor. (Electrolux 134638900 Motor Assembly Washer). Is this a correct diagnosis? thanks in advance sam
1 Answer Sam, 1. Find out if unit was overloaded.If not, remove belt from the motor and spin the motor pulley. Does the motor spin free? no then replace the motor. 3. Disconnect plug from the motor and measure resistance of the windings (pin 1 to pin 2,pin 1 to pin 3, pin 2 to pin 3).All readings should be between 3 and 6 Ohms. If readings are correct,check wiring from motor to motor control board,If good, replace motor control board.If the readings are incorrect, replace motor. Read More...
David March 22, 2018 for Model Number EiEFW55HIWU Washer is very loud when in rinse cycle. could it be bearings??
1 Answer Hello David. If you are getting a loud roaring noise from the unit then it is possible the bearing in the unit are bad. You can turn the drum by hand to check them. Thank you. Read More...
Maurice March 16, 2015 for Model Number FAFS4174NW0 My washer doesn't work for final spin cycle. Is this the correct motor? Error on the screen says motor.
1 Answer Hello Maurice. You will need to order and replace the motor 134638900 on the unit. Read More...