Customer Questions and Answers for Upper Felt Seal by Frigidaire

Hello Maricela! You can change the upper felt seal 134440200 by removing the front panel. Here are the instructions from the manufacture on how to remove the front panel, hope this helps! Front Panel Removal: The front panel is secured to the unit frame with screws along the front bottom edge and top left and right corners. Two plastic retainers along each side of the front panel prevent the panels from vibrating and creating noise. To remove the front panel: 1. Remove the top panel and control console. 2. Remove the loop spring and release the bellows from the front panel. 3. Disconnect the Molex connector leading to the wire harness of the door latch at the upper right hand corner next to the controller assembly. 4. Using a #2 square bit screwdriver, extract the four screws along the bottom front edge. 5. Extract the six screws along the top front edge. 6. Lift up then pull the front panel off of the plastic retainers and remove from unit.