David F for Model Number frs26r2aw6 Just received the starter kit: AP5736381 (5304491941) and the instructions state to connect the red and blue wires to the red and blue wires coming from the molex connector. Only problem is that both of the wires coming from the molex connector are white. Looking at the black and white photo in the instructions the darkest wire is to the outside of the device and the lighter wire is closest to the capacitor. Am I correct to assume that the darkest wire at the edge of the device (in the photo) would be where the red wire would be spliced and the lightest color wire closest to the capacitor is where the blue wire would be spliced? As there are no markings on the device stating which is the line and which is the neutral post. Nor are there any markings on the white wires. The photo shows this as (starting with the left edge) CAPACITOR LIGHT WIRE DARK WIRE (right edge)
Answer David, The blue wire is the neutral on the unit and will go on the pin that is closest to the long shaft in the middle of the relay. The red wire will connect to the one on the outside pin. Read More... Answered by AppliancePartsPros.com | Monday, February 8, 2016