Dennis for Model Number FEX831cso Hi. My stack waher does not agitate. No motor sound, just sits there In the spin cycle that works well. I replaced the timer but is having the same problem any suggestion as to what the next step should be. Thanks.
Answer Hi Dennis. Set the timer in regular, low wash cycle. After the tub fills to a small wash,then remove power. Gain access to the pressure switch part 134422700. Disconnect(temporary test) the #1 terminal red wire and the#2 white wire . Slide connect them together and use electrical tape on them for safety.Remove the pressure sw. hose. Blow into it towards the tub. If you have just felt restrictions then the unit needs cleaned w/ washer magic part # TJ131 monthly. Then pull the timer out to start the wash cycle. If it agitates now then the pressure switch needs replaced. If not remove power and jump together the tan/blk and tan /blk from the lid switch part # 134101800. If it stats to agitate now then replace the lid switch. Reconnect the pressure switch and test again. If it still runs then just replace the lid switch. If not replace both the lid switch and the pressure switch. Thank You. Read More... Answered by AppliancePartsPros.com | Wednesday, June 13, 2012