Brad for Model Number FFBD2406NW9B My dishwasher is not starting. After a cycle is selected, the lights on the display light up. The 'start' button/light is flashing. When pushed, the light stops blinking (steady on). Normally you would hear the water start filling in the dishwasher. Now, you can hear a click like the valve is energizing but no water flow can be heard. I have not taken anything apart as of this moment. I figure it is either the control board not sending a signal to the water fill valve (bad board) or that the valve is not operating (bad valve) or that something is blocking the water line. It also seemed that you had to push the start button, with a momentary holding it in, before it would start. None of these problems were and instant stopping of the machine working. It has been a gradual progression to the point that it will not work at all. Please advise. Thank you
Answer Brad, "Now, you can hear a click like a valve is energizing but no water flow can be heard." First, check and make sure the float isn't blocked or stuck in the up position. Then check or replace the water inlet valve 807047901 Valve and flush the water supply line from under the sink, Read More... Answered by AppliancePartsPros.com | Monday, October 12, 2020