Millie for Model Number GSD3960L00SS I have a leak on the corners and the middle of our dishwasher door. I ordered and replaced the baffles, the gasket around the door. It kept leaking so I looked online again and what was suggested was a long bottom gasket - part #WD08X10075. I ordered it but upon inspection, there wasn't an old one to replace nor a groove to slide it into?? I then reviewed the video for the gasket again and this time I saw a middle piece that goes between the ends of the gasket around the door part #WD08X10015. Turns out that piece was missing entirely. I didn't see either of those on the diagram for the dishwasher. I'm crossing my fingers that this works. If it doesn't do you have any other suggestions?
Answer Millie, oftentimes, this type of failure occurs if there is a crack or clogged jet in the lower spray arm WD22X155 or if the water overfills. It is recommended that the lower spray arm be inspected and that the water level be checked to identify if it is filling up to the lip of the tub. If it is filling up to the tub lip, the unit is overfilling and the valve would need to be tested to identify if it is allowing water to pass through when there is no voltage being applied to it. Read More... Answered by AppliancePartsPros.com | Monday, February 14, 2022