Kevin Armstrong for Model Number GSE25HGHBHBB temp in refrigerator and freezer are too warm. The evaporator has good frost coverage and the defrost system works. The evap fan didn't seem to be working, so I replaced it. It seemed to be working but didn't seem fast enough. I checked the board and found a burnt spot, so I replaced the board. Waited for 24 hours and the temp would only drop to 12 in freezer and 48 in refrigerator. I checked the fan again and now it won't run. I tested for power at the board (j2-3 and 4). It shows 12.66v. Door switch works the light and I held the switch down, but fan still doesn't run. Can a bad thermistor in the freezer or fridge cause the fan not to run at all? The one that is on the evap line came with the fan, so it is new. I just haven't replaced the compartment ones in the freezer and fridge. Am I missing something? Could the new fan be defective? I heard that you could test the fan with a 9 volt battery. How? HELP!
Answer Kevin, If the fan is not running then this will be an issue with the fan if the fan is getting the proper voltage. The fact that there was a burnt spot on the control board could be an issue where the fan was damaged by the faulty control board. Read More... Answered by AppliancePartsPros.com | Wednesday, August 11, 2021