Customer Questions and Answers for Range Lp Orifice Spud by Ge

Hello GE Oven User, You will need to order WB28K10596 for the center burner, WB28K10424 for the right front, WB28K10590 for the front left, WB28K10592 for the left rear, and WB28K10390 for the right rear. Convert the regulator as follows: Remove the storage drawer, kickpanel and if applicable the access panel to access the regulator. (Some models will have a metal shield protecting the regulator that must be removed for conversion and reinstalled when conversion is complete.) The pressure regulator is located in the lower, left hand rear corner of the range as viewed from the front. b. Unscrew the plastic-protected hex-nut cap. c. Completely remove the protective plastic cap off the threaded metal cap. d. Turn the metal cap so the type of gas being converted to is displayed and replace the protective plastic cover. e. Screw the hex-nut cap back into the regulator. (Do not over tighten). To convert the bake and broil burners to natural, use a 1/2" wrench to turn the lower burner orifice hood counter-clockwise (When viewed from above) until it is snug with the base, approximately 2 1/2 turns. (To prevent damage when converting back to Natural Gas, do not over tighten the hood.)