Customer Questions and Answers for Refrigerator Water Tank Plastic Tube by Ge

Franny, To install this tube you will need to make sure that you have at least 1 5/16" to 5/16" adapter. You will then need to pull the unit out and shut the water off. Remove the cover over the compressor. remove the water valve and disconnect the tubing from the valve of the tube that split. Go to the front of the unit and remove the crisper drawers and crisper shelving. Cut pull the water line through that is split and cut it below where it connects to the water tank leaving enough room for the connector so about 2 to 3 inches left. Once this is done you connect the 5/16" connector to the tubing off the tank and the new tubing that you are installing and push through the floor and reconnect to the water valve. and reassembly the unit.