Customer Questions and Answers for Suspension Spring by Ge

Clark, The upper tub suspension springs (2) are replaced from or through the top of the washer :" To remove the top panel: Remove the 3 Phillips-head screws that attach the top cover, then pull the cover rearward. Note: It may be helpful to place a putty knife along the top seam between the cover and control panel, then tap lightly rearward. Remove the 3 (7-mm) hex-head screws that attach the rear of the top panel to the cabinet." You'll find the springs attached to the cabinet top flange seated in a "plastic" insert, and attached to the outer tub assembly. Thanks and Good Luck