Customer Questions and Answers for Flood Switch Assembly by Ge

Dave, " 1. Remove power to the dishwasher. 2. Remove the toe kick panel. 3. Remove the floor protector pan. 4. Remove the wire tie holding the harness to the sump. 5. Remove the lower rack. 6. Remove the lower spray arm. 7.Remove the filter vents (twist lock design, turn counter clockwise to remove). 8. Remove the fine filter(twist lock design). 9. Remove the course filter. 10. Remove the filter adaptor(tab lock design) by pulling up on the adaptor. 11. Remove any water in the sump area. 12. Remove the two 1/4 in. hex head screws securing the floor plate and flood switch. 13. Remove the floor plate and flood sensor. Lift sensor and floor plate out of sump. 14. Remove the harness to the flood switch assembly. " Reverse the procedure to install replacement part and test the dishwasher for operation and leaks.