Wil for Model Number Wpse4200aoww Ok guys as stated on other questions to you I have been having problems with my washer stopping at the correct water levels I have replaced the press. switch, replaced the water valve and the press. Switch hose and the problem continues what do you suggest that I do now? Do I need to replace the main board ? Does the main board control the different levels? I did forget to mention to that I disconnected the hose to the press. Switch end that leads to the dome chamber and blew air while the washer was filling and it stopped when I blew air and when I stopped blowing it continued to fill what does that mean ? Please advise. Wil
Answer Hello Wil. Spin all the water out of the tub. Then remove the hose from the switch and blow though the hose to remove any water out of the air dome on the side of the tub. Try running the washer and see if it operates properly. if not, you may have a bad air dome on the unit and will need to replace the outer tub WH45X20473 to repair the issue with the unit. Read More... Answered by AppliancePartsPros.com | Monday, May 7, 2012