Jan for Model Number LG washer WM2077CW My water wont drain out was making alot of noise like bearings were going out. Is this just the water pump or should I look for other issues? Would make cycle until the draining part the would give a OE code on display screen. Water was still in the tub. Please Help husband travels and I have to fix this myself. Also if you have a diagram of where this part is located would really appreciate this. Also include part number so I can order asap. Thanks Jan
Answer Hello Jan. Remove the front pump cover and remove the filter from the pump housing. See if the filter is clogged. If it is clear, you will need to replace the pump motor 4681EA2001T. Unscrew 2 screws on the back of the top plate. Pull the top plate backward and upward. Disconnect the Display PWB Assembly connector from Trans cable. Pull out the drawer and unscrew 2 screws. Lift the left side of the Control Panel Assembly and pull it out. Unscrew the 4 screws from upper of the canbinet cover. Unscrew the screw from filter cover. Put a flat ( - ) screwdriver or putty knife into the both sides of the filter cover, and pull it out. Unscrew the screw from the lower side of the cabinet cover. Open the door. Disassemble the clamp assembly. Tilt the cabinet cover. Disconnect the door switch connector. Lift and separate the cabinet cover. Separate the pump hose, the bellows and the circulation hose assembly from the pump assembly. Disassemble the pump assembly in arrow direction. Hope this helps. Read More... Answered by AppliancePartsPros.com | Saturday, July 23, 2011