Teri for Model Number LG WM2301H My front loader is going through the drain and spin cycle fine, however, not all the water is getting pumped out. No error code is showing at the end of the cycle, but my laundry is still quite damp. After doing 2 loads, I emptied about a quart of water from the little hose next to the drain filter on the bottom left. I have checked the filter and it is clean. I watched your video and took the washer apart to get to the pump, it was full of water and debris. While researching the part, I put a bowl under the tub-to-drain hose and water has slowly been collecting in it (about 12 oz. overnight). So 2 questions; does the drain pump need to be replaced if it had water and debris in it or just cleaned? And should there still be water coming from the tub? Water to the unit has been turned off. Thanks.
Answer Hello Teri. If the water is dirty, then it sounds like the drain pump is not working properly on the unit. If it fills with clean water while the unit is turned off, then it is a water valve issue. Read More... Answered by AppliancePartsPros.com | Tuesday, March 7, 2017