Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Customer Questions and Answers for Drain Hose Assembly by Lg

4.89 (64)
By: Lg
Part Number: OEM18000336
Manufacturer Part Number: AEM69493807

The Drain Hose Assembly is an OEM part for LG dishwashers. This crucial component ensures the effective expulsion of used water from the dishwasher to the home's drainage system. 

Causes of a bad drain hose assembly often include clogging due to food particles and debris, which can obstruct water flow. Additionally, physical damage like cracks or splits from wear or improper installation can compromise the hose's integrity, leading to leaks or backups.

Symptoms of a faulty drain hose assembly include:

  • Water leaking from beneath the dishwasher.
  • Failure to fully drain water at the end of a cycle, leaving residue and odors.
  • Visible signs of wear or damage to the hose.

This OEM LG part is also compatible with Sears/Kenmore.

More
$48.95
Compare At:
$58.25
You Save:
$9.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Lg Drain Hose Assembly (Part Number: OEM18000336)

View all Questions

Answer

Hi Scott.Step 6: DRAIN LINE CONNECTION 1. If the end of the drain hose does not fit to the drain line, use an adapter (not supplied) that must be resistant to heat and detergent and may be obtained from a plumbing shop. 2. There are 2 typical connections as shown in Figures C & D. ? There may be other options than shown here for connection the drain hose. The drain connection must meet local plumbing regulations. ? The S trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage. ? To prevent syphoning, one of the following instruction methods must be followed: ??Follow local codes and ordinances. ??Do not exceed 10 ft. (3m) distance to drain. ??Do not connect drain lines from other devices to the dishwasher drain hose. Drain Requirements Figure C: Connection to Disposer or waste Tee. Dishwasher Drain Hose Sink Min. 20?(508mm) Min. 30?(770mm) Max. 40?(1000mm) 1/2? (13mm) 3/4? (19mm) 1? (25mm) In case Figure C In case Figure D,Cut off the Drain Hose in a dotted line Figure D: Connection to Air Gap. Dishwasher Drain Hose Rubber Connector Sink Min. 20?(508mm) Min. 30?(770mm) Max. 40?(1000mm) Air Gap - 36 - Step 7: WATER SUPPLY CONNECTION 1. When connecting, sealing tape or sealing compound should be used to avoid water leaks. 2. Before connecting, turn off the water supply. 3. After fitting the Elbow into the Inlet Valve, slide the Flexible Stainless Tube or Copper Tube into the Elbow. 4. Tighten the nut and make sure that the line is not kinked or sharply bent. Inlet Valve Water Supply Tube Elbow 1. Before beginning, turn off electrical power to the unit at the circuit breaker. 2. Remove the Junction Cover and then Install the Strain Relief. 3. Twist Wire Connectors tightly on the wires. Wrap each connection with Electrical tape. 4. Check again and make sure that all wires are connected correctly, black to black, white to white, green to green (ground to ground). 5. Replace the Junction Cover. Junction Cover Wire Connector Junction Case Strain Relief. In Your installation guide is a pictoral view for the installation of the drain hose connections. Thank you.

Read More...

Answered by AppliancePartsPros.com   |   Saturday, July 16, 2011

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store