Ric for Model Number WM2277HW My LG washer is getting an LE error. The Tech came out and swapped the hall sensor and the stator assembly to no avail. He thinks it's the Main PCB. He didn't have a rotor to swap. On your website, I see two part numbers . 6871ER1003C and 6871ER1003F. Which one is correct. Is this part number on the board itself? When I put the washer in SPI cycle, the drum will not move and after 3 or 4 min I get the LE. When I put it in RINSE CYLE only. The drum will move in both direction sometimes but is a bit noisy and eventually display LE. When I power off the washer and move the drum by hand clockwise and counter I don't feel a lot of resistance. Please advise.
Answer Ric, The LE error code would not generally have anything to do with the control board. These are the things that would need to be checked. The connector 3 pin male white in the motor harness for being connected to the connector 3 pin female white of the stator assembly. The electric contact between the connectors in the motor harness and 4 pin female white connector in the main pwb assembly for being bad or unstable. The motor harness between the stator assembly and the main pwb assembly is cut (open circuit). The hall sensor has already been replaced so it will not be that. But the wiring needs to be checked. Read More... Answered by AppliancePartsPros.com | Thursday, March 14, 2013