Tony for Model Number WF219ANW/XAA-01 Just double-checking. I ordered the drain pump and want to see if I should check anything else. Got an ND code. I drained the washer with the drain hose and it worked until it needed to drain again. ND code again. I could hear the pump on but it sounds funny to me. I disconnected the discharge hose at my drain and no water is coming out with the pump on. Checked the trap of course. With the water drained I could see and feel the impeller spinning but still no discharge with water in the tub. I then created a suction on the discharge hose with my wet vac. I dropped it low and the water drained into a bucket through it by gravity. With that, it seems there are no obstructions since the water makes it through the pump but the pump pushes no water. It's kind of like a pump losing prime or not being primed. If a pump sucks air this happens but there are no water leaks and the pump is low and if it can suck air it would leak water. I figure the pressure switch and hose must be ok because if I manually drain it everything else works. So what do you think?
Answer Hello Tony, If the water pours out with gravity but the pump cannot push the water out, you will need to replace the drain pump DC31-00054A to correct the issue. Read More... Answered by AppliancePartsPros.com | Friday, January 24, 2020