Pete P for Model Number Samsung WF306LAW washer My Samsung WF306LAW washer won't drain. I've removed the drain pump and bench tested it and when I hit it with the proper power it runs great. I've tested the power on the board where the trouble shooting guide says to and I have power. I've ohmed the wiring and it's good. Where the wiring from the pump attach to the board and where the guide says to test it are different although in the same clip. I'm not sure if this is a board issue or not and I don't want to order the wrong part. Any ideas? Thank you.
Answer Pete, You will want to check the drain line coming from the bottom of the tub to make sure that there is not anything clogging it. If this checks ok then you will want to run a spin and drain cycle and see if the motor is actually coming on or not. If it is not then the wiring or control board would be suspect. If it running then the impeller is most likely damaged and the pump would need to be replaced. Read More... Answered by AppliancePartsPros.com | Tuesday, August 27, 2013