Henry for Model Number WA45T3200AW/A4 Hello my friend, I have problem with the washer machine error code is SE and the machine can not drain the water. Please can you help me. Thanks
Answer Henry, if the back panel of the console is removed along with the control cover, the voltage output to the drain pump DC97-19289F can be tested during a drain and spin cycle. At the 6-wire connector (CN1), the black wire at pin 4 would be tested for 120VAC to the yellow wire at pin 1 of the 3-wire connection to the right of it (CN8). If there was no voltage at all, the main control DC92-02636A has failed. If there is voltage and the drain pump is not operating, the wires would need to be checked for any breaks or pinched sections. If the wires check ok, the drain pump has failed. However, if the drain pump did turn on, the water would need to be drained out manually after unplugging the power cord to inspect the hoses for any clogs. If there are no clogs, the drain pump has failed. Read More... Answered by AppliancePartsPros.com | Wednesday, November 30, 2022